SIM LAB VERSION 2.2 Vario VESA Triple Adapter Set Instruction Manual
- June 13, 2024
- SIM-LAB
Table of Contents
INSTRUCTION MANUAL
VARIO™ VESA TRIPLE ADAPTER SET
VERSION 2.2
Last updated: 09-10-2023
BEFORE YOU START
Thank you for purchasing this Sim-Lab product! On the following pages, you
will find detailed instructions on assembly. This requires only a set of
simple tools and some of your time. Please check the bill of materials before
starting (page 11) and make sure all the parts are delivered.
This product is available in a set of 3 while also being available
individually. This manual will focus on the set of 3, hence the quantities in
the bill of materials are what they are.
Inserting Slot-Nuts
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you can
see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle the Slot-Nut
in place. Tools needed
Measurements given are just reference measurements to allow for easy
installation and offer a baseline.
Install A9 only after the Vario VESA holder has been mounted to a profile.
Drop the pin (A4)
into the slot and carefully angle the monitor downwards to rest on the end of
part A12.
Now you can make all neccesary adjustments.
The highlighted parts are responsible for the adjustments shown.
All adjustments are done by simply threading an adjustment screw in/out
depending on what you want to achieve.
BOX A – Vario VESA triple adapter set HARDWARE KIT
| # | Part | QTY | Note |
|---|---|---|---|
| Al | Vario VESA holder | 1 | |
| A2 | Vario VESA plate | 1 | |
| A3 | Vario VESA pin holder | 2 | |
| A4 | Vario VESA pin | 1 | |
| A5 | Bolt M5 X 20 DIN 7991 | 4 | |
| A6 | Screw M4 X 16 DIN 7985 | 4 | Philips head. |
| A7 | Screw M4 X 10 DIN 7985 | 4 | Philips head. |
| AS | Bolt M8 X 16 DIN 912 | 2 | |
| A9 | Set screw M8 X 40 DIN 916 | 3 | |
| A10 | Set screw M5 X 20 DIN 916 | 2 | |
| All | Washer M8 DIN 125-A | 2 | |
| Al2 | Slot-Nut M8 | 2 | |
| A13 | Standoff M4 x 10 | 4 |
Disclaimer. for some entries on this page, we supply more than required as spare materials. Don’t worry if you have some leftovers, this is intentional
If you still have some questions regarding assembly of this product or about
the manual itself, please refer to our support department. They can be reached
at [email protected]
Alternatively, we now have a Discord server where there are quite some
experienced Sim-Lab customers hanging out. They might just help you along if
you ask them nicely 😉 www.sim-lab.eu/discord
If you feel like printing this manual, please consider the environment before
doing so. For the best results, make sure you print at 100% scale without
borders.
Product page on the Sim-Lab website:
https://sim-lab.eu/vario-vesa-kit
Documents / Resources
| SIM
LAB VERSION 2.2 Vario VESA Triple Adapter
Set
[pdf] Instruction Manual
VERSION 2.2 Vario VESA Triple Adapter Set, VERSION 2.2, Vario VESA Triple
Adapter Set, VESA Triple Adapter Set, Triple Adapter Set, Adapter Set
---|---