SIM LAB Vesa 75/100 Integrated Monitor Mount Instruction Manual
- June 12, 2024
- SIM-LAB
Table of Contents
SIM LAB Vesa 75/100 Integrated Monitor Mount
BEFORE YOU START
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before starting (page 10) and make sure all the parts are delivered.
Inserting Slot-Nuts
You got excited, finished the build, and put the caps on, but forgot to install one element. Do not worry. It happens to everyone. In this diagram, you can see how to insert a Slot-Nut directly into the slot from the side. You can also use one of your smaller Hex wrenches to help wiggle the Slot-Nut in place.
Breaking tabs
Sometimes tabs from corner brackets need to be broken off in order to fit as instructed. Place a flathead screwdriver behind the tab and tilt upwards. Always make sure to point away from you while doing so. To know when to do this, we will show the following symbol next to the brackets.
Tools needed
INSTALLATION
PROFILE KIT
#| Part| QTY| Note
P1| 40X40 Length=680mm| 1|
P2| 40X40 Length=200mm| 2|
HARDWARE KIT
A3| VESA bracket L-shape| 1|
A4| Integrated monitor bracket| 2|
A5| Corner bracket 40×40| 2|
A6| Corner bracket 40×40 cap| 2|
A7| Profile 40×40 end-cap| 4|
A8| Bolt M8 X 25 DIN 912| 10|
A9| Bolt M8 X 16 DIN 912| 4|
A10| Bolt M6 X 16 DIN 912| 2|
A11| Washer M8 DIN 125-A| 16|
A12| Screw Philips M4 X 16 DIN 7985| 4| Extra
A13| Screw Philips M4 X 10 DIN 7985| 4| Extra
A14| Spacer male/female M4 X 10| 4| Extra
A15| Slot-Nut M8| 16|
A16| Slot-Nut M6| 2|
Disclaimer: for some entries on this list, we supply more than required
as spare materials. Don’t worry if you have some leftovers, this is
intentional.
If you still have some questions regarding assembly of this product or about
the manual itself, please refer to our support department. They can be reached
at [email protected].
Alternatively, we now have a Discord server where there are quite some
experienced Sim-Lab customers hanging out. They might just help you along if
you ask them nicely 😉 www.sim-lab.eu/discord.
If you feel like printing this manual, please consider the environment before
doing so. For the best results, make sure you print at 100% scale without
borders.
Product page on the Sim-Lab website:
Documents / Resources
| SIM
LAB Vesa 75/100 Integrated Monitor
Mount
[pdf] Instruction Manual
VESA 75-100, Vesa 75 100 Integrated Monitor Mount, Vesa 75, Vesa 100, Vesa 75
Integrated Monitor Mount, Vesa 100 Integrated Monitor Mount, Integrated
Monitor Mount, Integrated Mount, Monitor Mount, Mount
---|---