TELLUR TLL158331 PD103 10000mAh Power Bank User Manual

TLL158331 PD103 10000mAh Power Bank
User Manual

INTO YOUR GREEN FUTURE

Thank you, for choosing Tellur!
Please read this user manual carefully before using the product and keep it safe for future reference.
Please note! Damages caused by misuse of the product will not be covered by the product’s warranty.

Technical parameters

1.1 Product appearance

1. Indicator light
2. USB Output Port 1
3. Type-C Input/Output port
4. Micro USB Input (DC 5V/2A)
5. USB Output Port 2

1.2 Technical specifications
Battery: Li-polymer
Capacity: 10000mAh
Micro-USB input: 5V/2A , 9V/2A , 12V/1.5A
Type-C input (PD 3.0): 5V/3A , 9V/2A , 12V/1.5A (18W)
Type-C output (PD 3.0): 5V/3A , 9V/2A , 12V/1.5A (18W)
USB A output 1/2 (QC3.0): 5V/3A , 9V/2A , 12V/1.5A
Total output: 3A
Total power output: 18W
Rapid recharge time: 3-4H with 18W Power Delivery
Charger + Type-C to Type-C Cable (not included)
Protection functions: Short circuit, overcharging, over-discharging, overcurrent
Material: ABS + Wheatstraw
Dimensions: 135.5 x 69 x 16mm
Weight: 230g
Available colors: Cream
Compatibility: Universal
Compatible PD devices: iPad Pro 12.9”, iPad Pro 10.5”, iPad Pro 11”, iPhone 13 mini/ 13/ 13 Pro/ 13 Pro Max/ iPhone 12 mini/ 12/ 12 Pro/ 12 Pro Max/ SE/ iPhone 11/  11 Pro/ 11 Max/ XR/ X/ XS Max/ XS/ 8 Plus/ 8, Samsung S21 Ultra/S21+/ S21/ Samsung S20 Ultra/ S20+ /S20, Samsung S10+/ S10/ S10e, Google Pixel 4 XL/ 4/ 3a  XL/ 3a/ 3 XL/ 3

Package includes:
1 x 10000mAh PD100 power bank
1 x USB – Type-C cable (30cm)
1 x Manual”

Power display light

Indicator light:

1. Indicator light: There are 4 lights on the device to show the capacity.
   LED flashing
   LED switch off
   LED lighting
   The power bank will check and show the percentage of capacity when powered on.
   4 lights stand for: 25 50 75 100 (%)

Charge the power bank

when all the light is lighting.
1| | 25%–50%
2| | 50%–75%
3| | 75%–100%
4| | 100%

Charge the devices

light flashes until power runs out
1| | 25%–50%
2| | 50%–75%
3| | 75%–100%
4| | 100%

Charging instructions

3.1 Charge the power bank

• Connect the cable USB port to the charging device and the other end to the Micro USB or Type-C input connector of the power bank.
• After connecting, the power bank is automatically charged and the current power level on the battery status indicator flashes. When the battery is fully charged, the status indicator light will be on.

3.2 Charge digital equipment

• Check whether the charging voltage of the digital device matches the discharging voltage of the power bank.
• Select one matching charging cable, connect one end to the power bank output interface, and the other end to the digital device, power bank will automatically recognize to charge the digital device.

Cautions

1. Please note that the external battery can achieve the best performance only after two to three times the full charge cycles.
2. To extend the performance of the polymer battery, please, extend the charging time by up to 1-2 hours in the first three charge cycles.
3. Please do not attempt to disassemble or modify the product.
4. Please avoid physical damage to the product.
5. Please avoid using this product in the following environments: high temperature, low temperature, low pressure, humidity, dust, strong magnetic field, and long-term exposure to sunlight. We recommend using up to an altitude of 3000 meters, 0°C to 35°C, and humidity of 5-95%.
6. This product should not be exposed to drip and splashing with water.
7.  Please, use a charging cable, specific to the product.
8. Please, comply with relevant local environmental regulations to remove the product and accessories.
9. Please, contact your local retailer or customer service center if you have any questions.
10. This product is not a toy, please keep it away from children to avoid unnecessary accidents.

Tips

• If you do not use the power bank for a long time, we recommend you fully charge the battery and then placed it a dry environment with a temperature range from 5 – 35 °C, please avoid directly exposing the product to sunlight.
• Please fully discharge then perform full recharging if you have not used the power bank for more than three weeks or the battery life of the product becomes shorter.
• Unplug your device when fully charged

Disposal and recycling information
The crossed-out wheeled bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage.
It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment  (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment help ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful to health and the environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>