SIM-LAB SLC001 GT1-EVO Racing Cockpit Instruction Manual
- June 6, 2024
- SIM-LAB
Table of Contents
SIM-LAB SLC001 GT1-EVO Racing Cockpit
https://sim-lab.eu/shop/product/slc001-gt1-evo-sim-racing-cockpit-446info @sim-lab.eu
Required tools
Installation Steps
STEP 1: Attach cross memer profiles to the base
STEP 2: Attach second base profile to the assembly.
STEP 3: Once the base frame is assembled, attach the rubber feet to the ottom
STEP 4: Add seat rail profiles
STEP 5: Attach the uprights
STEP 6: Attach the wheeldeck holder profile
STEP 7: Attach the wheeldeck to the profile
STEP 8: Attach the pedal upright profiles
STEP 9: Attach the pedal deck bracket
STEP 10: Attach the side mount
Parts list
BOX A
Profile kit
Part No.| Part name| QTY| UoM| Note
A1| Profile 40mm slot 8 (Black, 40x40L) – 500mm| 2| Units|
A2| Profile 40mm slot 8 (Black, 40x80L) – 200mm| 2| Units
---|---|---|---
A3| Profile 40mm slot 8 (Black, 40x80L) – 1350mm| 2| Units
A4| Profile 40mm slot 8 (Black, 40x80L) – 400mm| 1| Units
A5| Profile 40mm slot 8 (Black, 40x80L) – 500mm| 3| Units
A6| Profile 40mm slot 8 (Black, 40x80L) – 580mm| 2| Units
BOX B
Hardware kit
Part No.| | Part name| QTY| UoM| Note
B1| GT1 EVO pedal deck| | 1| Units|
B2| GT1 EVO wheeldeck pivot plate (LEFT)| 1| Units|
---|---|---|---|---
B3| GT1 EVO wheeldeck pivot plate (RIGHT)| 1| Units|
B4| GT1 EVO wheeldeck plate| 1| Units|
B5| End cap profile (40x40L)| 4| Units|
B6| End cap profile (40x80L)| 9| Units|
B7| Rubber feet| 4| Units|
B8| Slot 8 nut (M6)| 12| Units| Bag HW 20.A
B9| Slot 8 nut (M8)| 75| Units| Bag HW 20.B
B10| Washer (Black steel, M8, Plain black)| 12| Units| Bag HW 20.D
B11| Bolt – DIN 912 (Black steel, 16mm, M8)| 72| Units| Bag HW 20.C
B12| Bolt – DIN 912 (Black steel, 16mm, M6)| 10| Units| Bag HW 20.D
B13| Bolt – DIN 912 (Black steel, 20mm, M6)| 20| Units| Bag HW 20.D
B14| Bolt – DIN 912 (Black steel, 25mm, M5)| 12| Units| Bag HW 20.D
B15| Bolt – DIN 912 (Black steel, 12mm, M8)| 4| Units| Bag HW 20.D
B16| Bolt – DIN 912 (Black steel, 20mm, M8)| 8| Units| Bag HW 20.D
B17| Nut (M5, DIN 985 locknut, Galvanised)| 12| Units| Bag HW 20.D
B18| Nut (M6, DIN 985 locknut, Galvanised)| 12| Units| Bag HW 20.D
B19| Nut (M8, DIN 985 locknut, Galvanised)| 8| Units| Bag HW 20.D
B20| Corner bracket + cover cap| 28| Units|
Appendix
Hardware used for reference, to scale
