2A7ZRM7AMZ7 Puremic MagicMic M7 User Manual
- June 1, 2024
- PUREMIC
Table of Contents
2A7ZRM7AMZ7 Puremic MagicMic M7
Specifications
- Product model : Microphone Mode
- Signal/Noise ratio : 75dB
- Battery Capacity : 3.7V@2600mAh
- Loudspeaker unit : 2in full frequency speaker 2+PR2
- The speaker power : 2x8W
- Bluetooth: Support Puremic MagicMic M7
- Bluetooth name: Puremic MagicMic M7
- Charging Interface : Type C
- The communication distance : 10m (open and barrier-free environment)
- Frequency response range : 100Hz-18KHz
- Microphone Dimensions : 100*185mm
- Weight: 450gProduct Usage Instructions
Connection & Use
- Connect to your phone via Bluetooth for Karaoke:
- Use your phone to search for microphone Bluetooth (Puremic MagicMic M7) and connect.
- Start playing music on your mobile phone and begin singing.
- Adjust Mic, accompaniment, and Echo using the function key or +/- key.
- The microphone connects to mobile phone recording/live broadcast:
- Connect the microphone to the phone using a cable.
- Connect the wired earphone to the microphone 3.5mm jack.
- Open the mobile phone’s APP to record songs.
Intelligent Interaction
- Take a pat: Start sleep aid mode
- Tap on top of the microphone twice in a row or press the sleep aid button to play sleep aid music automatically.
- Shake: plays interactive sound effects Shake the microphone twice in any direction to play different interactive sound effects.
FAQ
- Q: Can I use the microphone to record while in Bluetooth mode?
- A: No, microphone recording cannot be used in Bluetooth mode. For recording quality, use a cable to connect to a mobile phone.
- Q: What is the maximum recording duration for the microphone?
- A: The maximum recording duration is 60 seconds when the light rotates.
- Q: How do I adjust the music volume, mic volume, and echo on the microphone?
- A : Press the corresponding buttons on the microphone to adjust the music volume, mic volume, and echo levels.
THE BOX CONTAINS
PRODUCT FUNCTION
CONNECTION & USE
1. Connect to your phone via Bluetooth to Karaoke.
- Use your phone to search for microphone Bluetooth (Puremic MagicMic M7), and connect;
- Mobile phone playing music, then you can start singing;
- Press the function key or “+/-” key to adiust Mic. accompaniment and Echo
- 2. Microphone connects to mobile phone recording/live broadcast.
- 1) Use cable to connect the microphone to the phone, as shown;
- 2) Connect the wired earphone to the microphone 3.5mm jack, as 2 shown;
- 3) Open the mobile phone’s APP to record songs.
Microphone recording cannot be used in Bluetooth mode.
To ensure the recording quality, use a cable to connect to a mobile phone.
FCC STATEMENT
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
FCC ID : 2A7ZR-M7AMZ7
The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure condition without restriction.
INTELLIGENT INTERACTION
- Take a pat : Start sleep aid mode
- Tap on top of the microphone twice in a row (or hold the sleep aid button), the microphone will automatically play the sleep aid Music.
- Shake: plays interactive sound effects
Shake the microphone twice in any direction, and the microphone will play its different interactive sound effects.
Microphone Parameters
Safe y
Information
Thank you so much for purchasing Puremic Puremic MagicMic M7. Before using MagicMic M7, please read this manual carefully. Pay attention to the safety of use, and correctly operated to avoid unnecessary losses.
Warning:
- In case of smoke or other abnormal state of the machine, please pull out the power plug immediately and contact the local dealer for repair to avoid fire and other hazards.
- If there is water flow in the machine, please cut off the power contact the local dealer for repair to avoid electric shock and other dangers. supply of the machine and
- In case of foreign matter falling into the machine, please cut off the power supply of the machine and contact the local dealer for repair. Never disassemble or reassemble the machine without authorization, otherwise, the components of the machine will be damaged or there will be the danger of electric shock.
Name and content of hazardous substances in the product
The form is prepared according to the stipulation of SJ/T 11364
It signifies that the content for such hazardous substances in all the homogeneous materials of the part is lower than the limit stipulated in GB/T26572.
x : It means that the content for such hazardous substances in at least one of the homogeneous materials of the part exceeds the limit stipulated in GB/T26572.
Note: The environmental design concept of the product has been brought the hazardous substances under control effectively. “x”It means that the hazardous substances cannot be replaced for now restricted by the technical development level.
Environmental Protection Service life
The identification duration (ten years) indicates that the hazardous substances inside the electronic and electrical products will not leak or mutate under normal service conditions. It is a duration that will not cause severe pollution to the environment or serious damage to people and their property for the use of such products. 10
Shanghai Loostone Information
- Technology Co., Ltd
- SJTU Park Songjiang District, Shanghai
- www.loostone.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>