BOULT K60 Top Notch Bluetooth Earbuds User Manual
- June 15, 2024
- BOULT
Table of Contents
BOULT K60 Top Notch Bluetooth Earbuds
INRODUCTION
What’s in the box?
- Charging Case
- Earbuds
- Type C Charging Cable Manual
- Extra pair of ear tips Warranty Card
Product specification
- Product Name – TWS
- Bluetooth Headset
- Model
- Boult Audio Air Bass
- Bluetooth Range – ~10m/33ft (without any obstacles)
- Earbuds Charging Time ~ 60 mins
- Frequency Range – 20Hz – 20KHz
- Technology – HFP/HSP/A2Dp/AVRCP
- Input – DC5V = 1A
How to use your K60?
Touch Controls
- The Touch Area (Multi-Functional Touch Panel) is located in the upper part of the earbuds handle.
Wearing Earbuds
- The earbud marked with L is worn on the left ear and the earbud marked with R is worn on the right ear.
Power ON/OFF
Power ON
- Auto: Open the charging case and take out the earbuds to Power ON.
- Manually : Tap and hold the multifunction button (MFB) for 3 seconds.
Power OFF
- Auto: Place both the earbuds in the charging case, close the lid. Manually: Hold MFB for 5 seconds.
Play/Pause
- Tap the MFB once
Next Track
- Double Tap the right MFB
Previous Track
- Double Tap the left MFB
Volume+
- Triple Tap the right MFB
Volume-
- Triple Tap the left MFB Voice Assistant
Long Press the MFB for 2s
- Answer the Call
Tap the MFB once
- End Call/Reject
Double Tap the MFB
- Game/Music Mode
- Tap the MFB four times
Pairing
- Open the charging case, and take out the earbuds, the earbuds LEDs will start flashing automatically until paired with a device.
- Activate Bluetooth on the device, turn on Bluetooth, search tor pairing name “Boult Audio Airbases and click on it.
- Single Mode: When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
Bluetooth Lost
- Turn off mobile phones Bluetooth, earbuds will enter pairing mode and can pair with other devices.
- If the connection range is exceeded, the earbuds will enter the back connection mode. No connection within 5 minutes, the earbuds will turn oft.
Reset
- If your earbuds fail to pair, or only one works, reset them. Delete all “Boult Audio Airbases· Bluetooth records on the phone and turn off Bluetooth.
- Put earbuds in the charging case and then take out to pairing modes, tap L&R 5 times simultaneously, hear ·ou· prompt voice to clear all pairing.
- Put earbuds back into the charging case.
Voice Prompts
- You will hear ‘power on’ when the headset powers on.
- You will hear ‘power off” when the headset powers off.
- You will hear ‘connected’ when the headset is paired.
- You will hear ‘low battery’ when the headset is in low power status
- You will hear ‘gaming mode’ when the headset is in gaming mode.
Maintenance Instructions
- Warranty is valid/invalid only basis of the below criteria:
- The product should be purchased through legal and formal channels to be applicable for warranty.
- Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.
Read User Manual Online (PDF format)
Loading......