BOULT AUDIO SoulPods True Wireless Stereo (TWS) Earphones User Manual

June 3, 2024
BOULT AUDIO

BOULT AUDIO SoulPods True Wireless Stereo (TWS) Earphones User Manual
BOULT AUDIO SoulPods True Wireless Stereo \(TWS\)
Earphones

Package Introduction

Package Contents
Package Contents

Charging the Case

  • Use only 5V/1A USB charger to charge this product.
  • The Charging Indicator flashes while charging; and goes off after fully charged.

Activating Earbuds and Charging Earbuds

Put both earbuds into the charging case to acvate and charge them.( pins need to be well-contacted).
The Charging Indicator flashes while charging; and goes off aer fully charged.

TWS Pairing and Connection with Cell Phone

Take both earbuds out of the case at the same me and they will auto power on aer 3-5 seconds. Both earbuds will enter auto pairing, Search for “ Boult Audio SoulPods” in cellphone and tap to connect both earbuds with cellphone. Please insert both earbuds into charging case and repeat above steps if earbuds fail to connect.

Functions

Power-on
When you open the charging case, the earbuds turns on automatically or manually press 2 seconds to power on.

Power-off
Put it into the charging case and shut down automacally or press touch MFB for 5 seconds.
Shutdown aer 15 minutes without connecon.
Earbuds Functions

Next/Previous song
Press the left or right earbuds for 2 seconds.

Pause play
Double tap left earbuds or the right earbuds.

Answering calls
Double tap left earbuds or the right earbuds while incoming call.

Hang up the call
Double tap left earbuds or the right earbuds while on call.

Decline a call
Press left or right earbuds for 1 second while incoming call.

Switch between ANC Mode\Ambient Mode\Normal Mode
Triple tap the left earbuds to toggle one by one.

Voice Assistant
Triple tap the right earbuds.

Reset
Long press the charging case button for 10 seconds to clear paring.

FAQ

  1. The earbuds do not turn on.
    Make sure your earbuds are fully charged. If not, please charge them.

  2. Unsuccessful Bluetooth Pairing.
    Make sure that the earbuds are turned on and in pairing mode, the pairing distance is kept within 1m.

  3. Automatically Re-connect.
    When Power on, it will automatically re-connect to the last connected device.

  4. How long will it turn off automatically when it isn’t connected?
    The earbuds will automatically turn off after 15 mins if it doesn’t connect with bluetooth devices.

  5. If the left and right earbud don’t sync or connect with the phone because the headset is in re-connection mode or other mode, or if you can’t nd your preferred bluetooth device, you can Long press the charging case button for 10 seconds to clear paring.

WARNING!

  1. Do nOot remove or modify the earbuds for any reason, otherwise the earbuds may malfunction or burn, electronic breakdown or even completely damage the product.
  2. This product has built-in electric lithium-ion battery. It is forbidden to disassemble, impact, squeeze or put into re. If there is serious swelling, please do not continue to use it.
  3. Do not place the device in an environment where the temperature is too low or too high (below 0C or above 45C).
  4. Do not use the device during thunderstorms.
    Thunderstorms can cause the device to malfunction and increase the risk of electric shock.

This product has been inspected and qualied

Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BOULT AUDIO User Manuals

Related Manuals