AJAX FP2J7NA Fire Protect 2 SB Heat Jeweller User Manual

AJAX FP2J7NA Fire Protect 2 SB Heat Jeweller

WHAT’S INCLUDE

1. FireProtect 2 SB (Heat) Jeweller
2. 2 batteries CR 2/3  (non-replaceable)
3. Installation kit
4. Quick Start Guide

Specifications

• Model name: FireProtect 2 SB
• Product form: Heat alarm device —  goes from 0 to 9 to indicate the model fragmentation

Batteries are not replaceable and after 10 years FireProtect 2 SB (Heat) Jeweller Jeweller must be replaced.

Overview

This device is designed to detect rapid temperature rises and high temperatures as a standalone fire detector. It operates within the frequency range of 905–926.5 MHz F1D and complies with part 15 of the FCC Rules. Its operation is subject to two conditions: (1) the device may not cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 20 cm (7.87 inches) and the body of the user or nearby persons. The user manual, warranty, and additional guidelines are available on ajax.systems/end-user- agreement.

Precautions

• Batteries are not replaceable and, after 10 years or less, the FireProtect 2 SB (Heat) Jeweller should be replaced.
• Incorrect replacement between a equipment and receiver can increase the equipment operating out of its certified frequency to the point that it could disrupt the receiver.

FAQ

• What is the primary function of the FireProtect 2 SB (Heat) Jeweller?
  It is designed to detect rapid temperature rises and high temperatures as a standalone fire detector.

• What is the maximum sound notification volume?
  The sound notification volume is 85 dB at a distance of 10 ft.

• How long can the FireProtect 2 SB (Heat) operate on its battery?
  It can operate up to 10 years from the battery.

• What are the operating temperature and humidity ranges?
  The operating temperature range is from 32°F to 122°F and the operating humidity is up to 80%.

• Is the battery replaceable?
  No, the batteries are not replaceable, and the device should be replaced after 10 years or less.

• Where can I find the user manual and warranty information?
  The user manual, warranty, and additional guidelines are available on ajax.systems/end-user-agreement.

• Who is the manufacturer of FireProtect 2 SB (Heat) Jeweller?
  ‘SIA Manufacturing’, LLC located in Ovruch, Ukraine is the manufacturer.

Quick Start Guide
Before using the device, we strongly recommend reviewing the User Manual on the website.

FCC Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20 cm the radiator and your body: Use only the supplied antenna.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device contains a licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

To maintain compliance with ISED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body: use only the supplied antenna.

Warranty

Warranty for Ajax devices is valid for two years after the purchase date. If the device does not work correctly, you should first contact the support service – in half of the cases, technical issues can be solved remotely. The full text of the warranty is available on the website: www.ajax.systems/warranty.

• User Agreement: www.ajax.systems/end-user-agreement.
• Technical support: [email protected]

The manufacturing date is indicated on a sticker at the bottom of the box. The importer’s name, location, and contact details are indicated on the package.

Manufacturer Information

• Manufacturer: “AS Manufacturing” LLC.
• Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine.
• www.alax.svstems

ajax.systems/support/devices/fireprotect-2-sb- heat/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>