BOULT AUDIO ProBass Anchor Active Noise Cancellation Bluetooth Wireless Over Ear Headphones User Manual

ProBass Anchor Active Noise Cancellation Bluetooth Wireless Over-Ear Headphones
**User Manual

**

ProBass Anchor Active Noise Cancellation Bluetooth Wireless Over-Ear

Headphones

For a better sound quality experience, suggest using IOS 8.0/ Android 4.3 or above operating system.
Please refer to the Safety Precautions mentioned on the last page of this manual before operating this device.

BLUETOOTH CONNECTION

Pairing
You need to pair a BT device with the headphones in advance in order to enjoy listening to wireless music or make phone calls. You can connect to a BT device any time after it has been paired.
Pairing and Connecting a BT Device
Check that the headphones are not connected to any BT device before pairing.
1-Turn on the BT function of your mobile device.
****For details, see the Owner’s Manual of the BT device that you want to connect.
When the headphone’s power is off, press and hold the control button for approximately 6 seconds.
When the status indicator LED lights flash red and blue alternately indicating that the headphones are in pairing
1- Select “Boult Audio ANCHOR” from the list of devices displayed on the screen of your BT device.

– When pairing is complete and a BT connection is established, the status indicator LED on the headphones lights blue for approximately 5 seconds.
– If the power is off, turn the power on before pairing.
– If you are requested to enter a PIN code(passkey), enter”0000 (four zeros).

Opening The Box

| Audio Cable
---|---
| USB Charging Cable
| User Manual
| Headphones

Turning The Power ON/OFF

Turn on the BT function of the BT device that you want to connect to beforehand.
Press and hold the headphones’ Power on/off button for approximately 3 seconds.
– A beep sound is heard and the status indicator LED lights red for approximately 1 second.
-The headphones automatically connect via BT to the BT device when the device is already paired with the headphones.
Turning the power off
Press and hold the Power on/off button for approximately 5 seconds.
– “Power off” is heard and the status indicator LED lights purple for approximately 1 second.
Note – A small amount of power is consumed even when the power is off.

Product Introduction

1. LED Light
2. ANC On/OFF Button
3. 3.5mm line-in Female
4. Power On/OFF
5. Volume+/Next
6. Volume-/Previous
7. USB charging port
8. Mic

Charging & Battery

Connect the headphones to a computer or USB AC adapter to Charge the battery.
The charging status can be checked from the status indicator LED on the headphones.

– When using the headphones for the first time after purchase or when the remaining power of the rechargeable battery is low charge the battery.
Note
– When the dedicated charging cable is connected to the headphones, the power of the headphones turns off and the mode becomes charging mode. Before use after charging, disconnect the cable from the headphones and turn on the power.
– When connecting the dedicated charging cable to the charging port, be sure to match the cable connector with the shape of the socket. Forcing the connector into the socket will cause damage.
– The rating of the charging output should be DC 5V, 2.4A or less.
– The usable time of the headphones differs depending on the temperature of the environment in which they are used and the method of use.

Features

Boult Audio ANCHOR has a BT version 5.0 chip that supports Headset, Handsfree, HSP HFP A2DP, and AVRCP protocols. That chip ensures the best possible connection between your earphones and the audio source.
SOUND
Boult Audio ANCHOR has 40mm sound-optimized high-quality drivers which provide deep bass frequencies and crisp clear trebles.
WIRELESS
Boult Audio ANCHOR has a BT version 5.0 chip that supports a headset, Handsfree, HSP HFP A2DP, and AVRCP protocols. That chip ensures the best possible connection between your earphones and the audio source.
COMFORT
ANCHOR is designed for long listening hours. Super soft noise-isolating earpads make the Boult Audio ANCHOR extra comfortable. Adjustable headband covered with faux leather and soft cushion.
DURABILITY
ANCHOR is more durable than it appears. The headband was made of metal construction under the artificial leather and cushions. It is as comfortable as durable.

Listening Music

Long press to move to the next music
Volume – / Previous| Short press to decrease the volume and it will have reminding invoice when it get to top volume
Long Press to move to the previous
answer/stop Call| When call come, Press to answer the call, press the button again to stop call answer/stop call
Reject call| When call come, press 2-3 seconds
answer/stop| Short press 2 times, call back the newest call phone number.

Trouble Shooting

The BT function of the headphones does not switch on: -When the rechargeable battery has no power remaining, connect the headphones to a computer using the supplied dedicated charging cable to charge the battery. When the dedicated charging cable is connected to the headphones, the power of the headphones turns off and the mode becomes charging mode. Before use after charging, disconnect the cable from the headphones and turn on the power.
Cannot pair a BT device :
-Check that the power of the headphones is switched on.
-Move the BT device that you want to connect closer to the headphones.
Cannot connect using BT:
– Check that the power of the headphones is switched on.
– Check that the power of the BT device is on and the BT function is enabled.
– Check whether the BT device is in sleep status.
– Pair the devices again.
Sound is not output from the headphones when connected using BT:
– Check that the power of the headphones is switched on.
– Check that the power of the BT device is on and the BT function is enabled.
– Select A2DP as the BT connection profile on the transmitting BT device. For details, see the Owner’s Manual of the BT device.
– Check that audio is being played back on the BT device.
– Increase the volume. Increase the volume on the BT device if it is necessary to adjust the volume on the BT device.
– Pair the devices again.
Cannot hear the caller’s voice:
– Check that the power of the headphones is switched on.
– Check that the power of the BT device is on and the BT function is enabled.
– Select HSP or HFP as the BT connection profile on the transmitting BT devices.
For details, see the Owner’s Manual of the BT device.
– Check that the BT device is setting handle calls through the headphones. For details, see the Owner’s Manual of the BT device.
– Increase the incoming call volume.

Functions

Ignoring an incoming call
Press and hold the call button for approximately 2 seconds when an incoming call is received.
Voice Assistant
Press and hold the button for 2 seconds to activate the google voice assistant or Siri.

Specifications

30 hours (ANC function only)
20 hours (with both Wireless
connecting and ANC)

Precautions for Use

Be sure to read the Owner’s Manual of the device that wants to connect.
– Check the volume settings when using the headphone on public transport or in public places and make sure you do not disturb people around you.
– These headphones are not guaranteed to work with all combinations of BT devices/mobile phones.
– These headphones do not support connection with all BT devices/mobile phones.
– BT wireless technology can communicate over a distance of approximately 10 m. However, obstructions(people, metallic objects, walls, etc.) and radio wave conditions affect the range in which communication is possible.
– The BT device that you want to connect must support the same profile as these headphones in order to use the BT function. For details on profiles that the BT device is compatible with, see the BT device Owner’s Manual.
– Due to features of BT wireless technology, playback of audio on the headphones is slightly delayed compared to the voice/audio playback on the transmitting device.

Disposal of Electrical Items

Disposal Of Electrical items This marking shown on the product or its literature indicates that it should not be disposed of with other household waste at the end of the lifespan.
To prevent possible harm to the environment or human health from controlled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased the product or the local government office for details of Where and how can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes of disposal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>