Boult Audio XPods Bluetooth Earbuds User Manual

Boult Audio XPods Bluetooth Earbuds

Product Picture

1. Smart finger touch
2. Earbuds sounds hole
3. Case Charging point for Pods
4.  Type-C charging port
5. Pods Charging point
6. Charging LED Indicator

Power On

1. Take the earbuds out of case, they will automatically turn on and pair with each other.
2. Long press for 2s to power on, if the case is not at hand.

Power Off

1. Earbuds will automatically turn off and enter charging mode when they are placed in the case.
2. Disconnecting the Bluetooth from device and laying the earbuds down for 3 mins will turn them off.

Pairing

For the first time pairing, take the earbuds out of case and search bluetooth “ Boult Audio XPods” on your cell phone, and tap to connect.

Regular use:
Once next use, the earbuds will automatically connect with a preconnected device.

Clear to pairing

Clear the pairing record of earbuds and mobile phones:
Take out the earbuds from the charging case, and touch the left and right earbud 5 times, it will clear the record of the Bluetooth device, Then search for the Bluetooth name “Boult Audio Xpods” to pair.

Resume pairing of left and right earbuds:
Put earbuds in the charging case and charge, then take earbuds out of the charging case when they are charged a few minutes. they will enter into pairing mode automatically.

Charging

Earbuds:
Put earbuds into charging case, and they will be charged automatically. (LED green indicate flashes once you put earbuds right place.)

Charging Case:
Plug the attached Type-C cable in the Computer or charger, the green light indicator flashes when the charging case is being charged, and will keep green light after being fully charged.

Battery of Charging case

Note:
Please charge for the case with DC5V/1A charger or Computer USB; As the charging and discharging of the earphones increases, the battery performance will decrease, which is normal for all rechargeable batteries (Don’t press the contact of the spring pin hard to avoid improper use.)

Functional Operation

Music

Single-click: Either earbud for Pause/Play.
Double Click: The left earbud for previous songs, The right earbud for next song.

Incoming call

Single Click: Either earbud to answer Call.
Double Click: Either earbud to reject / End Call.

Siri Voice assistant

Long Press 3S : Either earbud to activate siri voice assistant.

Tips:

1. The Volume can be adjucted by the phone. Please use the earbud in reasonable volume and time, otherwise it will damage your hearing if you listen the music for long time in high volume.
2. In the Mono mode, double click the earbud only for next song.

Specification

Attention

1. Do not remove or ref it earbuds for any reason, otherwise it will lead to headset damaged and burn. These are not covered by warranty.
2. Do not touch the earbuds in corrosive liquid, otherwise it will cause serious damage, The Manufacturer will not guarantee the damage caused under this situation.
3. Do not put the equipment under too high or too low temperature (Below 0C or above 45C).
4. Please avoid approaching the eyes of children or animals when using equipment lights.
5. Do not use equipment in the thunderstorm weather. Thunderstorms may cause abnormal equipment operation and increase the risk of electric shock.
6. Due to the limit of the environment & connection distance for the bluetooth products, do not use our earbuds in large electromagnetic interference and radiation environment.
7. While driving, try to avoid using earbud to listen to music, make or receive calls, so as not to distract from danger.

Warning

This product contains a built-in lithium battery. Please do not expose this product to strong sunlight, roasting or throwing it into the fire, as they may explode.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>