TRAXON RGBW Media Tube Plus User Guide

June 17, 2024
traxon

TRAXON RGBW Media Tube Plus

Dimensions (Direct View)

TRAXON-RGBW-Media-Tube-Plus-FEATUREDTRAXON-RGBW-
Media-Tube-Plus-FIG- \(2\)

Dimensions (Diffused View)

TRAXON-RGBW-Media-Tube-Plus-FIG- \(3\)

Tube-to-tube Clearance

To maintain a consistent LED pitch and to allow for thermal expansion for Tubes:

TRAXON-RGBW-Media-Tube-Plus-FIG- \(4\)

  • The minimum distance depends on the temperature difference.
  • Normally, it is 1.5mm/0.06” (direct view) or 4mm/0.16” (diffused view).
  • When the temperature difference is greater than 35o C/95 F, 5mm/0.2” is needed.
  • Max. distance: 100mm/3.94

Tube-to-tube Connection

TRAXON-RGBW-Media-Tube-Plus-FIG- \(6\)

NOTE
Flat cable whip enables simple connections and adjustable distance between fixtures. If you do not hear a “click”, rotate the spring-loaded lock nut manually to lock the connectors and ensure that they are properly mated to protect them from water ingress.

Mounting

TRAXON-RGBW-Media-Tube-Plus-FIG- \(7\)

System Diagram – Starter Cable Installation

TRAXON-RGBW-Media-Tube-Plus-FIG- \(8\)The Address wire is not needed between the controller and the first fixture. This wiring diagram shows only typical connections.

Actual wiring depends on LED Tube configuration and installation. Actual no. varies according to cable lengths and signal source.

TRAXON-RGBW-Media-Tube-Plus-FIG- \(11\)Please consult your local Traxon office for aid. This wiring diagram shows only typical connections. Actual wiring depends on LED Tube configuration and installation. Actual no. varies according to cable lengths and signal source. Please consult your local Traxon office for aid.

  • CONNECT TO THE POWER SUPPLY BY NATIONAL REGULATIONS.
  • THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE CAN NOT BE REPLACED; IF THE CORD IS DAMAGED, THE LUMINAIRE SHALL BE DESTROYED
  • THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.
  • INSTALLATION/MAINTENANCE ONLY BY SKILLED PERSONNEL.
  • DURING OVERHAUL/MAINTENANCE ONLY USE ORIGINAL PARTS.
  • IF ANY LUMINAIRE IS SUBSEQUENTLY MODIFIED, THE PERSON RESPONSIBLE FOR
  • THE MODIFICATION SHALL BE CONSIDERED THE MANUFACTURER.
  • THE MANUFACTURER BEARS NO LIABILITY FOR DAMAGE CAUSED BY INAPPROPRIATE USE OR APPLICATION.

2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals