BOULT AUDIO Probass QCHARGE Bluetooth In Ear Earphones User Manual

CHARGE
USER MANUAL

For a better sound quality experience, suggest using IOS 8.0/ Android 4.3 or above operating system.

Product Introduction

Button illustration:

1. Multi-function Button
2. USB TYPE-C
3. LED indicator
4. Volume-/Previous Track
5. Volume+/Next Track
6. MIC

CHARGING YOUR EARPHONE

Your Bluetooth earphone comes with a built-in rechargeable battery and a Type-C charging cable
Charge fully before use
Using the charging cable through the corresponding port to charge the battery, the LED Indicator will show red, while charging, and show blue once fully charged. Charging time is approximately 1 hrs.

GETTING STARTED

To use your Bluetooth earphones, Please follow the steps below.

1. Ensure your Bluetooth earphones are fully charged.
2. Pair your Bluetooth earphones to a Bluetooth- enabled device prior to use. (See Pairing Instructions)

Powering On the Earphone
Press and hold the Multi-Function Button for 3 seconds until blue light on
Powering Off the Earphones
Once powered on, press and hold the Multi-Function Button for 3 seconds until the red lights are on and out.

PAIRING YOUR EARPHONE

1. Power on your Bluetooth earphones and it will enter pairing mode automatically after 6 seconds if it is not already paired with any devices. If it already gets connected to a paired device, please disconnect it from that paired device to enter pairing mode again.
2. Activate the Bluetooth function of your devices and start to search.
3. Select “BOULT AUDIO QCHARGE” from the listed devices and connect.
4. The indicator will be every 10 seconds once successfully paired/connected.

Note:

1. The earphones should be within 30ft range of your Bluetooth devices while pairing/playing.
2. The earphones will automatically power off without connection for 5 minutes

MUSIC MODE

Adjust Volume:
Short press the Volume+ to raise the volume or Volume- to lower the volume by your Bluetooth devices.
Play/Pause Music:
Once connected, short-press the Multi-Function Button to play or pause music.
Previous Track:
Press and hold the Volume- 1 second to the Previous Track.
Next Track:
Press and hold the volume+ 1 second to the next track.

CALL MODE

Answering a Call:
short press the Multi-Function Button to answer an incoming call, or answer the call normally via your mobile phone.
Rejecting a Call:
Press and hold the Multi-Function Button for 2 seconds to reject the incoming call.
Ending a Call:
Short press the Multi-Function Button to end the call or end the call directly from your mobile phone.
Voice Assistant:
Once connected, Double click the Multi-Function Button for 2 seconds to access the voice assistant of your smartphone.

LED INDICATOR

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>