BOULT AUDIO Probass Curve Wireless Earphones User Manual

Table of Contents

BOULT-AUDIO -Probass-Curve-Wireless-Earphones-PRODUCT

For better sound quality experience, suggest use IOS 8.0/ Android 4.3 or above operation system.

Please refer to the Safety Precautions mentioned on the last page of this manual before operating this device.

Step 1: Make sure the product is fully charged.
Step 2: Press and hold the multi-function button for 5-6 seconds (approximately) to power-on the neckband. The neckband will indicate with red & blue flashing LED light. Now, the neckband is in paring mode & ready to connect with your device.
Step 3: Turn-on the bluetooth on your device & scan until you see “Boult Audio Curve”
Step 4: Click on “Boult Audio Curve” and pair your device with the neckband. Once paired, the neckband will indicate with blue flashing LED light. Now, you can enjoy your music & calls.

Step 1: Turn-on the bluetooth on your device.
Step 2: Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the Neckband.
Step 3: The neckband will connect to your same device automatically. If not, connect to “Boult Audio Curve” in the bluetooth settings on your device.

BOULT-AUDIO -Probass-Curve-Wireless-Earphones-FIG-1

Use only 5V/1A USB charger to charge this product.
This product or the bluetooth functions cannot/should not be used during charging.
This neckband will indicate with quick flashing red LED light when the neckband’s battery need to be charged.
Solid red LED light will indicate on the neckband while charging
Solid blue LED light will indicate on the neckband once charging is complete.

Voice assistance
- Click on the multi-function button for 2 seconds to activate the Google assistant/Siri.
Google assistant/Siri will pop up on your phone screen.
- Play/Pause music
- A single click on the multi-function button to play/pause the music.
Answer/End/Reject calls
- A single click on the multi-function button to answer/end a call.
- Press & hold the multi-function button for 2 seconds to reject the incoming call.

Voice assistance
- Click on the multi-function button for 2 seconds to activate the Google assistant/Siri.
- Google Assistant/Siri will pop up on your phone screen.
Play/Pause music
- A single click on the multi-function button to play/pause the music.
Answer/End/Reject calls
- A single click on the multi-function button to answer/end a call.
- Press & hold the multi-function button for 2 seconds to reject the incoming call.
Redialing the last call
- Double click on the multi-function button to redial the last phone number on your mobile phones dialing list.
Change music track
- Press & hold the (-) volume button for one second to change the music track to the previous track.
- Press & hold the (+) volume button for one second to change the music track to the next track.
Increase/Decrease volume
- A single click on the (-) volume button to decrease the volume.
- A single click on the (+) volume button to increase the volume.
Switch ON/OFF
- Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the neckband. Flashing blue LED light will indicate on the neckband when powered-on.
- Press and hold the multi-function button for 3-4 seconds (approximately) to power-off the neckband. Red LED light will flash and the neckband will get in Switch on/off section.

Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the neckband.

Please keep this device away from extreme heat, humidity or corrosive environment.
Please don’t over-charge the neckband as it will decrease the service life of battery.
Please use only a good quality phone charger (5V/1A) or USB charging port to charge the neckband.
This product or the bluetooth function should not be used during charging.