InWin ASP120 Sirius Pure Fans x 3 2. Addressable RGB One-Click Controller User Manual
- June 6, 2024
- InWin
Table of Contents
**InWin ASP120 Sirius Pure Fans x 3 2. Addressable RGB One-Click Controller User Manual
**
Product Video Information
Sirius Pure Product Video
Product Story
Simple but Classic – Siriusly White
Purity at its finest. Elegantly vibrant. This season, we present you not a black appearance, but a white Sirius, an elegant beautiful design that will elevate your PC builds!
Package Contents
Triple Pack
- Sirius Pure ASP120 Fans x 3
- Addressable RGB One-Click Controller x 1
- Screws x 12
**Single Pack
**
- Sirius Pure ASP120 Fans x 1
- Screws x 4
Cable Information
PWM Fan Cable, Addressable RGB Cable
ARGB One-Click Controller
(Note: Only in Triple Pack)
Installation
-
Please make sure the power is off.
-
Install the fans in your PC case and mount them in the designated areas.
-
The fan cable, Addressable RGB Cable and their counterparts are attached to each fan.
Please connect as follows: -
a/b Connect the fan’s Addressable RGB Cable to a motherboard’s 3-pin addressable RGB header. Connect the attached fan cable to the motherboard’s fan header. Installing the 2nd fan: Connect the
-
c/d Addressable RGB Cable and connect it to the available 3-pin Addressable RGB header on the previous fan. Connect the fan to the available fan header from the previous fan.
-
Installing the 3rd fan: Repeat c/d
If your motherboard does not support an addressable header, please use the
included Addressable RGB One-Click Controller to connect to your PSU’s SATA
cable and the fan’s Addressable RGB Cable in order to use the 14 different
lighting effects.
Hold the button to turn on or off the lights.
Tap the button to change the lighting modes.
- Rainbow
- LED-Red Breathing
- LED-Green
- LED-Blue
- LED-Purple
- LED-White
- Light at the end of the Tunnel
- Two-Tone Ring
- Diagonal Transition
- Rotating LED Trio
- Full Circle
- Flow-Red
- Flow-Green
- Flow-Blue
InWin reserves the right to change the lighting modes.
Troubleshooting
If your fan does not operate properly, please follow the instructions below:
- Please check your system’s power.
- Please make sure all the connectors are connected properly.
Important Notes
- Please install the fan by following our instructions.
- When storing the fan, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.
- Please do not put anything in the impeller.
- Please do not modify the wires or the connectors provided by InWin.
- Please do not touch the fan blades when the fan is in operation.
- Please only use your fan in a computer case.
- Please keep this product away from any liquids.
Specifications
- Product Name Sirius Pure ASP120
- Quantity Included Single Pack Triple Pack
- Model Number ASP120FAN-1PK ASP120FAN-3PK
- Colors White
- Fan Size 120 x 120 x 25mm
- Materials PC, PBT
- Rated Voltage 12V
- Rated Power 1.2W
- Rated Current 0.1A
- ADD RGB Rated Voltage 5V
- ADD RGB Rated Power 1.25W
- ADD RGB Rated Current 0.25A
- Speed Mode PWM 500~1800 RPM
- Air Flow 50 CFM
- Air Pressure 1.67mm/ H2O
- LED Addressable RGB
- Connector (Fan to Fan) Original Cable
- Connector to M/B 4 Pin (PWM, 12V), 3 Pin (ARGB, 5V)
- Noise Level 13-27 dBA (Max.) / 19 dBA (Normal)
- Bearing Type Long Lifespan Sleeve Bearing
- Gross Weight 200g 600g
- Package Dimensions (L x W x H) 185 x 125 x 30mm 185 x 125 x 80 mm
- Warranty 2 Years
InWin’s products comply with RoHS regulation.
Specifications may vary based on different regions.
Copyright © 2020 In Win Development Inc. All Rights Reserved.