GE Lighting PK-00102687-3 Cync Smart Room Starter Pack Instructions
- June 14, 2024
- GE Lighting
Table of Contents
GE Lighting PK-00102687-3 Cync Smart Room Starter Pack Instructions
Let’s get plugged into what your Smart Plug + Smart Bulb can do together
-
Schedule your lights to turn off at night.
Go to CYNC App and schedule the time and days of the week to turn off lights and devices under Scenes. -
Turn on your desk fan and lights on your way home from work. Go to the CYNCApp and toggle on your
Smart Bulbs and Smart Plug from your smart phone. -
Can’t remember if you turned off the curling iron and bathroom lights?
Go to the CYNC App to check the status of your Smart Bulbs and Smart Plug. Toggle off your Smart Bulbs and Smart Plug from your smart phone to turn off devices away from home.
Smart Plug
FCC Compliance Statement Compliance Notice:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications that are not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 8 inches during normal operation.
RF Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This transmitter must be installed to provide
a separation distance of at least 8 inches from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter.
Smart Plug
CAUTION – High Voltage – Disconnect power supply before servicing Operation temperature: 0-40°C
Type 1 Enclosure
IP20
Pollution Degree 2
Impulse Voltage: 1500V
Type 1.B action
Indoor use only.
GE is a trademark of General Electric Company.
Used under trademark license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>