EPROPULSION MD4830N06 E Battery Solar Charger 48V 1600W User Manual
- June 14, 2024
- EPROPULSION
Table of Contents
EPROPULSION MD4830N06 E Battery Solar Charger 48V 1600W
Please read this manual carefully before use. This manual is subject to update without prior notice, please visit our website www.epropulsion.com for the latest version.
Introduction
Thank you for purchasing ePropulsion E Battery Solar Charger 48V-1600W. The E Battery Solar Charger 48V-1600W is a product designed for the E-Series Battery.
Declaration of conformity
Object of the Declaration:Product:
- Product: DC & Solar Charge Controller
- Model: MD4830N06
We Guangdong ePropulsion Technology Limited, hereby, declares that this equipment is compliance with the applicable Directives and European Norms, and amendments. The object of the declaration is in conformity with the following directives:
- Electromagnetic Compatibility (EMC) 2014/30/EU
- DirectiveLow Voltage Directive (LVD) 2014/35/EU
Applied Standards
- EN IEC 61000-6-3:2021
- EN IEC 61000-6-1:2019
- EN IEC 61000-3-2:2019+A1:2021
- EN 61000- 3- 3:2013+A1:2019+A2:2021
- EN 62109-1: 2010
EC R EP
- Name: REP Europe GmbH
- Address: Werner-von-Siemens-Str. 264319 Pfungstadt Germany
- Phone: +49 157 51253212 info@rep-europe.de
Manufacturer
- Name: Guangdong ePropulsion Technology Limited
- Address: Room 801, Building 1, 11 Daxue Road, Songshan Lake, Dongguan, Guangdong Province, China
- Signature:
- Date: 2023/10/18
Shizheng Tao, Chief Executive Officer & Cofounder of Guangdong ePropulsion Technology Limited
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Interface description
| No. | Item |
|---|---|
| 1 | LED indicator light |
| 2 | Battery communication interfaces |
| 3 | Positive interface for Solar Panel |
| 4 | Common negative interface |
| 5 | Positive interface for Battery |
| 6 | Fixed hole |
Dimensions
- Product dimensions ：233262100mm
- Mounting dimension ：215*132mm
- Fixing hole position： φ6mm
Specifications
| Specifications | PV Input | Protection | Environment | Dimension |
|---|---|---|---|---|
| Rated voltage | 51.2 Vdc | Power | 1600W | Overcharge protection, overcurrent |
protection, overtemperature protection, reverse connection protection of solar panel, reverse charging protection
at night. No reverse connection protection for backup battery (external fuse is needed)
| Operating temperature| -35℃ to 65℃| ****
Weight
| ****
5.3 kg
Charging Voltage Range
| ****
41.6 -57.6
Vdc
| Maximum input current of PV| ****
50A
| ****
Altitude
| ****
≤3000m
Maximum PV input voltage| ****
60 Vdc
| Protection grade| ****
IP65
| ****
Dimen- sions
| ****
233262100
mm
Maximum CC Charging Current| ****
30A
| ****
Efficiency
| ****
＞ 99%
| ****
Certification
| CE、 RoHS
Packing List
| Item | Qty. | Note |
|---|---|---|
| E Battery Solar Charger 48V-1600W | 1 pcs | / |
| Ring Terminals SC35-8 | 6 pcs | / |
| Solar Charger Output Cable (Positive) | 1 pcs | **** |
Connect Solar Charger to E Battery or Busbar
Solar Charger Output Cable (Negative)| 1 pcs
Solar Charger Input Cable (Positive)| 1 pcs| ****
Connect Solar Charger to Solar Panel
Solar Charger Input Cable (Negative)| 1 pcs
Remote Switch Extension Cable Without Resistance| 1 pcs| When connecting
multiple devices, connect the Remote Switch to E60/E163
MC4 Parallel Connector 4 in 1| 1 set| Contains positive and negative
E Battery Solar Charger 48V-1600W Manaul| 1 pcs| /
MC4 Connector Spanner| 1 pcs| /
Solar Charger communication Cable| 1 pcs| Suitable for E60/E163
Notes
- Do not reverse the input and output cable.
- Do not reverse the positive and negative poles of the Solar Charger.
- Use the Solar Charger within the specified voltage range.
- The Solar Charger Input Cable (Negative) and the Solar Charger Output Cable (Negative) are both connected to the GND of the Solar Charger.
- When paralleling multiple solar panels, please ensure that the specifications of the solar panels are consistent.
- Before connecting the E Battery Solar Charger 48V-1600W with the third party product, please contact ePropulsion authorized distributor.
- If the E battery is charged by the solar charger without a communication cable, it may not be fully charged to 100%. Installation process requires the following tools: Phillips screwdriver, wire crimping pliers (1- 5mm²).
Operations
- Please follow the wiring diagram below to perform wiring operations without power on.
- After connecting the wires, please turn on the battery system to power on, and then close the switch between the solar charger and the battery
- Before connecting, please prepare following products:Main Switch（>50A）、Solar Panel
- If there are more complex parallel operating conditions, please contact ePropulsion Technology’s authorized dealers.
- When only using a solar charger to charge the E60/E163, you will need to purchase the following additional materials:
Item
|
E Battery DC output cable 2.5m
(w aviation connector)
---|---
Qty.
|
1 set
When the solar charger is connected to E60/E163 and other devices as well, E60/E163 will prioritize charging using the E battery charger. In this case，you will need to
purchase the following additional materials:
Item| E Battery Bus Bar 150A| E Battery Bridging Cable| Battery Comm Cable T
Connector| Remote Switch| E Battery Charger
---|---|---|---|---|---
Qty.| 1 set| 1 set| 1pcs| 1pcs| 1 set
LED Indicator
- Status description of indicator lights
- Indicator light of solar panel
Color of indicator light|
Red
---|---
Indicating method| Normal ON| Slow
flash
| Single
flash
|
Fast flash
|
Double flash
|
OFF
Description
| MPPT
charging
| Boost charging| Floating charging| Equalizing charging| Current-limited charging| Not in charging
Indicator light of battery
| Color of indicator light | Green | Yellow | Red | Indicating method | Description |
|---|---|---|---|---|---|
| Indicating method | Normal ON | Normal ON | Normal ON | Slow flash | Fast flash |
Description B
|
attery fully charged
| Normal battery voltage| Battery undervoltage| Battery over- discharge| Battery overvoltage/battery over-temperature
If the indicator light of battery types remains in a steady cyan state, indicating that the connection to the E Battery is normal.
Warranty
ePropulsion E Battery Solar Charger 48V-1600W is guaranteed against any manufacturing defects for TWO years from date of delivery of products to end customers. Free warranty is only validated upon the presentation of legal serial number, Warranty Card, and evidence of purchase from an authorized ePropulsion dealer.
Conditions
Valid date of purchase should be established by the first-hand purchaser with
original sales slip. Free warranty is not transferable and will not be
reissued. The warranty is valid only when the information is correct and
complete.
Warranty does not cover
- Minor faults producing no influence on the intended function of the product.
- Faults resulting from any improper operation that contradicts the user manual.
- Accessories supplied with the product.
- Damage caused by accident, misuse or unauthorized repair.
- Damage caused by dropping, improper care or storage.
- If warranty expires, users can still enjoy maintenance services from ePropulsion authorized dealers with minimum maintenance charge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>