SIM-LAB GT1-PRO Integrated Single Monitor Mount Instruction Manual
- June 14, 2024
- SIM-LAB
Table of Contents
SIM-LAB GT1-PRO Integrated Single Monitor Mount
BEFORE YOU START
- Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before starting (page 10) and make sure all the parts are delivered.
- We encourage you to read the product manuals for included products if this one doesn’t answer all of your questions. Please refer to the following if needed: www.sim-lab.eu/vario-vesa-manual
Inserting Slot-Nuts
- You got excited, finished the build, put the caps on, but forgot to install one element. Do not worry. It happens to everyone. In this diagram, you can see how to insert a Slot-Nut directly into the slot from the side.
- You can also use one of your smaller Hex wrenches to help wiggle the Slot-Nut in place.
Tools needed
Assembly
- When parts B12 and B13 are installed like above, monitors are easy to install in a neutral position. Parts B12 can be adjusted to change the tilt and/or height.
- Parts B13 can be adjusted to adjust the monitor sideways if needed, and fix it in place.
BOX A – GT1-Pro Integrated Monitor Mount PROFILE KIT
#| Part| QTY| Note
A1| 40X40 Length=600mm| 1|
A2| 40X40 Length=500mm| 2|
HARDWARE KIT
A3| Integrated bracket| 2|
A4| Corner bracket 40×40| 2|
A5| Corner bracket 40×40 cap| 2|
A6| Profile 40×40 end-cap| 4|
A7| Bolt M8 X 25 DIN 912| 8|
A8| Bolt M8 X 16 DIN 912| 4|
A9| Cap-Washer M8| 8|
A10| Washer M8 DIN 125-A| 4|
A11| Slot-Nut M8| 12|
BOX B – Vario VESA Single Adapter HARDWARE
KIT
#| Part| QTY| Note
B1| Vario VESA holder| 1|
B2| Vario VESA plate| 1|
B3| Vario VESA pin holder| 2|
B4| Vario VESA pin| 1|
B5| Bolt M6 X 12 DIN 7991| 4| Used with VESA 100/200 adapter.
B6| Bolt M5 X 20 DIN 7991| 4|
B7| Bolt M4 X 16 DIN 7985| 4| Philips head.
B8| Bolt M4 X 10 DIN 7985| 4| Philips head.
B9| Bolt M8 X 16 DIN 912| 2|
B10| Bolt M6 X 16 DIN 912| 4|
B11| Bolt M5 X 16 DIN 912| 4|
B12| Set screw M8 X 40 DIN 916| 3|
B13| Set screw M5 X 20 DIN 916| 2|
B14| Washer M8 DIN 125-A| 2|
B15| Slot-Nut M8| 2|
- If you still have some questions regarding assembly of this product or about the manual itself, please refer to our support department. They can be reached at support@sim-lab.eu
- Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab customers hanging out. They might just help you along if you ask them nicely 😉 www.sim-lab.eu/discord
- If you feel like printing this manual, please consider the environment before doing so. For the best results, make sure you print at 100% scale without borders.
Product page on the Sim-Lab website
Documents / Resources
| SIM-
LAB GT1-PRO Integrated Single Monitor
Mount
[pdf] Instruction Manual
GT1-PRO Integrated Single Monitor Mount, GT1-PRO, Integrated Single Monitor
Mount, Single Monitor Mount, Monitor Mount, Mount
---|---