TEEHO TE002W Fingerprint Door Lock Installation Guide

TEEHO TE002W Fingerprint Door Lock

Product Information

The product you have is a Teeho Green Light Flash. It is a compact and portable device that emits a green light flash. The purpose of this product is currently unknown, as the user manual does not provide specific details about its functionality or intended use.

Product Usage Instructions

To contact customer service for any questions or assistance, you can use the following methods:

• Telephone Service: Call +1(833)878-3346 during business hours (Mon-Fri 9:00am-5:00pm EST).
• Email Service: Send an email to Support@Teeho.com.
• Amazon Customer Service: For 24/7 email support, please contact Amazon Customer Service.

To access additional resources and support, visit the Teeho website at www.teeho.com.

To watch installation and programming videos, scan the QR codes provided in the user manual using a QR code scanner app on your smartphone or tablet.

Please note that without further information, it is difficult to provide specific instructions on how to use the Green Light Flash product. If you require more assistance or have any specific questions about the product, we recommend contacting Teeho customer service for further guidance.

Scan QR code to download KK Home App

• Register an account in KK Home App
• Scan QR code on the inside panel to add TE002W to the device list
• Follow the setup steps to get started.

Download KK Home App from the App store or Google Play.

Parts List

The details of part identification is shown on following page

Parts identification

Prepare the door and check dimensions

• Measure to confirm that the hole in the door is 2-1/8″ (54mm).
• Measure to confirm that the backset is either 2-3/8″ or 2-3/4″(60 or 70mm).
• Measure to confirm that the hole in the door is 1″(25mm).
• Measure to confirm that door thickness is between 1-3/8″ and 2″ (35mm to 50mm).

Before Installing the Lock, Check Door Jamb and Door Preparation

Installation

Choose faceplate

Is the slotted hole centered in the door hole?

Install latch and deadbolt

IMPORTANT: Keep the latch in unlocked position before installation.

Install exterior assembly

Install interior assembly
Do not load batteries until lock is completely installed.

• Remove the battery cover.
• Connect the cable and ensure tight cable connection.
• Rotate the Thumb turn in vertical position and insert the horizontal orientation of torque blade into the interior assembly lock switch.
• Secure the interior assembly with the supplied screws.
• Test the lock by rotating the thumb turn to see if the bolt can be extended and retracted smoothly.

Detect left/right hand door installation

IMPORTANT:
This step is required and crucial for the lock after installation!

• While the door is open and unlock, load 4 AA batteries into the interior assembly.
• Press and hold the reset button 5 seconds by using the reset tool provided in package.
• The lock will automatically lock. This is for the smart lock to memorize the orientation of the door.

Parts illustrations

The default master code is 12345678. It’s required that you change it to a code of your own before programming.

How to use?

• Unlock the door from outside
• Unlock the door from inside
• Lock the door from outside
• Lock the door from inside

Quick set up

• The default master code is 12345678. It’s required that you change it to a code of your own before programming.
• When setting is unsuccessful, the indicator light will flash red.

Information and safety warnings

Do not load batteries until lock is completely installed.

• Protect your user codes and master code.
• Restrict access to your lock’s interior assembly and routinely check your settings to ensure they have not been altered without your knowledge.
• This lockset is designed to provide the highest standard of product quality and performance.Care should be taken to ensure a long-lasting finish. When cleaning is required use a soft and damp cloth. Using lacquer thinner, caustic soaps, abrasive cleaners or polishes could damage the coating and result in tarnishing.

1. Master PIN Code (4~10 digits): The default master pin code is “12345678”, It’s required that you change it to a code of your own before programming.
2. User PIN Code (4~10 digits):A total of 20 user codes(and one temporary one-time user code) may be programmed.
3. Both master and user PIN codes don’t support the following combination of numbers below.

Definitions

1. Master Code

   • Required for programming and feature settings. Master code can be used to unlock the door under vacation mode. The default master code needs to be changed before programming.
   • Property owner/manager should keep this information confidential.

2. Auto Lock
   Automatically locks the deadbolt 30 seconds after unlocking. This feature is off by default. You can set the Auto Lock time delay between 30 and 180 seconds.

3. Wrong Entry Limit
   After 10 unsuccessful attempts at entering a invalid PIN code, the unit will shut down for 3 minutes.

4. Silent Mode
   The beep sounds when pressing keypad can be muted. But you will still hear low battery and system alerts.

5. Vacation Mode
   This is a security feature for you when you are leaving your home for vacation or long trip. Enabling vacation mode will restrict all user codes until master code is entered on keypad. If the lock is unlocked by thumb turn, the lock will sound an alarm.

6. One Time User Code
   This code can only be used once and is automatically deleted when used.

7. Unlock with Fake Code
   User can prevent pin code exposure from strangers by entering random digits before or after pin code.

Factory default settings

Restore factory default settings
This procedure will delete all user codes which associated with the lock.

1. Keep the door opening and unlocking;
2. Press and hold the reset button, taking out one battery and then place it back at the same time;
3. Keep holding the reset button for 3 seconds until you hear the sound of “ВЕЕР”.

Troubleshooting

Installation

Operation

If the lock appears to be damaged or does not operate properly, please contact customer service for further assistance.

Any questions please contact us

• Telephone Service
  +1(833)878-3346 (Mon-Fri 9:00-5:00pm EST)

• Email Service
  Support@Teeho.com.

• Amazon Customer Service
  24/7 Email Support

• Website: www.teeho.com.

References

• TEEHO | Your Best Digital Door Lock

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>