TeeHO TE002K Smart lock Instruction Manual

TeeHO TE002K Smart lock

Product Information

The product is a smart lock designed for use on doors. It features a thumb turn and an interior assembly lock switch. The smart lock has a reset button and requires batteries for operation.

Product Usage Instructions

1. (Optional) Rotate the thumb turn in a vertical position.
2. Insert the horizontal orientation of the torque blade into the interior assembly lock switch.
3. Keep holding the reset button on the smart lock.
4. Load the last battery into the smart lock.
5. Continue holding the reset button until you hear a long beep sound.
6. The lock will automatically go into the locking position.
7. This step is crucial as it allows the smart lock to memorize the orientation of the door.
   Please note that these instructions are for setting up the smart lock and ensuring it memorizes the door’s orientation.
   Additional instructions for normal usage, such as locking and unlocking, may be provided in the complete user manual.

Parts List

Prepare the door and check the dimensions

Choose faceplate

Is the slotted hole centered in the door hole?

Install latch and deadbolt

IMPORTANT: Keep the latch in unlocked position before installation

Parts identification

Install exterior assembly

Install interior assembly

• Remove the battery cover.
• Connect the cable and ensure tight cable connection. Rotate the Thumb turn in vertical’
• position and insert the horizontal orientation of torque blade into the interior assembly lock switch.
• Secure the interior assembly with the
• Test the lock by rotating the thumb turn to supplied screws. see if the bolt can be extended and retracted smoothly.

Installation Instructions of Knob

Parts ist

Prepare the door and check the dimensions

If your door already has the holes shown in the picture below, proceed to the next step, if your door does not have holes, use the mounting template to drill a new hole.

Latch backset adjustment

Backset is the distance from the door edge to the center of the hole in the door.
The latch is provided with an adjustable design which can fit either 2-3/8″(60mm) or 2-3/4 70mm) backset.

Install latch and strike

Install front and rear knob

Test the knob

Keep the door open, checking out front and rear lever to test if it works smoothly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>