TeeHO AZ06 Smart Door Lock Installation Guide
- June 10, 2024
- TeeHO
Table of Contents
AZ06 Smart Door Lock
Product Information
The TC?C?H AZ06 Smart Lock is a device designed to provide users
with a convenient and secure way to lock and unlock their doors. It
is equipped with license-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s
license-exempt RSS(s). The lock is compliant with part 15 of the
FCC Rules and complies with FCC radiation exposure limits for an
uncontrolled environment. The device should be installed and
operated with a minimum distance of 20cm between the radiator and
the user’s body.
Product Usage Instructions
-
Installation: Follow the installation guide included with the
product to install the Smart Lock on your door. -
Programming: Follow the programming instructions included with
the product to set up your Smart Lock. This may include setting up
a passcode or connecting the lock to a smart home system. -
Locking/Unlocking: To lock or unlock your door, enter your
passcode or use the smart home system to control the lock. The
Smart Lock will emit a sound to confirm that the door has been
locked or unlocked. -
Safety Precautions: Keep a minimum distance of 20cm between the
radiator and your body when using the Smart Lock. Do not make any
changes or modifications to the device that are not explicitly
approved by the manufacturer as this could void your authority to
operate the equipment.
TC?C?H
AZ06
Smart Lock
Installation Guide I Program1ing Instructions
Ill //
2 5
8)
Thankyou ror png our pUCw hmlhlyhJrurd .cluinthiUI are forill’purpaonly. Adualproducty db pruduct u
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement
English: This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device. The digital apparatus complies with
Canadian CAN ICES3 (B)/NMB3(B). French: Cet appareil contient des
émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de
licence d’Innovation, Sciences et Développement économique Canada.
L’exploitation est soumise aux deux conditions suivantes :
(1) Cet appareil ne doit pas provoquer d’interférences.
(2) Cet appareil doit accepter toute interférence, y compris les interférences
susceptibles de provoquer un fonctionnement indésirable de l’appareil.
l’appareil numérique du ciem conforme canadien peut3 (b) / nmb3 (b). This
device meets the exemption from the routine evaluation limits in section 2.5
of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
cet appareil est conforme à l’exemption des limites d’évaluation courante dans
la section 2.5 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf,
les utilisateurs peuvent obtenir des données canadiennes sur l’exposition aux
champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
Cet équipement est conforme aux limites d’exposition aux rayonnements du
Canada établies pour un environnement non contrôlé.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm
entre le radiateur et votre corps.