EPROPULSION G1554-1200W E Battery Charger Instruction Manual
- June 15, 2024
- EPROPULSION
Table of Contents
EPROPULSION G1554-1200W E Battery Charger
Product Information
The E Battery Charger is a high-quality product designed specifically for the E-Series Batteries. It offers a wide input voltage range, universal voltage compatibility, and minimal interference with other electrical equipment. The charger is designed with IP65 protection level, ensuring excellent waterproof performance. It can be used in parallel with other chargers and provides quiet operation, high reliability, and simple installation, operation, and maintenance.
Product Usage Instructions
- Read the Manual: Before using the E Battery Charger, carefully read the reference manual provided. Familiarize yourself with the correct and safe operations of the charger.
- Agreement and Liability: By using this product, you acknowledge that you have fully read and understood the contents of the manual. Please note that ePropulsion does not accept liability for any damage or injury caused by operations that contradict the manual.
- Product Updates: The manual may be subject to updates without prior notice. Visit the website www.epropulsion.com to access the latest version. If you encounter any discrepancies between your product and the manual or have any doubts, refer to the website for assistance.
- Intellectual Property Rights: ePropulsion holds intellectual property rights and industrial property rights, including copyrights, patents, logos, and designs. Respect these rights and do not infringe upon them.
- Interpretation of Manual: In case of any discrepancy in the interpretation of different language versions of the manual, the English version shall prevail.
- Operation Conditions: The device must meet the following conditions:
- it should not cause harmful interference, and
- it must accept any interference received, including interference that may cause undesired operation.
- Declaration of Conformity: The E Battery Charger is in compliance with applicable directives and European norms. It meets the Electromagnetic Compatibility (EMC) directive 2014/30/EU and the Low Voltage Directive (LVD) 2014/35/EU. Thecharger conforms to various standards, including EN 55032:2015+A1:2020, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A2:2021, EN 55035:2017+A11:2020, and EN 62368-1:2014+A11:2017.
- EC REP: The European Representative for ePropulsion is REP Europe GmbH. Contact information : Werner-von-Siemens-Str. 26, 4319 Pfungstadt, Germany. Phone : +49 157 51253212, Email : info@rep-europe.de
Please read this manual carefully before use. This manual is subject to update without prior notice, please visit our website www.epropulsion.com for the latest version.
Introduction
The E battery charger is a product designed for the E-Series Battery. It has: wide input voltage range, universal voltage; small interference to other electrical equipment; designed in accordance with IP65 protection level, high waterproof performance; can be used in parallel; quiet work, high reliability, simple installation, operation, and maintenance.
Using this manual
Before the use of this product, please read this reference manual
thoroughly to understand the correct and safe operations. By using this
product, you hereby agree that you have fully read and understood all the
contents of this manual. ePropulsion accepts no liability for any damage or
injury caused by operations that contradict this manual.
Due to the ongoing optimization of our products, ePropulsion reserves the rights of constantly adjusting the contents described in the manual. ePropulsion also reserves the intellectual property rights and industrial property rights including copyrights, patents, logos and designs, etc. This manual is subject to update without prior notice. Please visit our website www.epropulsion.com for the latest version. If you find any discrepancy between your products and this manual, or should you have any doubts concerning the product or the manual, please visit www.epropulsion.com. ePropulsion reserves the right of final interpretation of this manual. This manual is multilingual, in case of any discrepancy in the interpretation of different language versions, the English version shall prevail.
Operation is subject to the following three conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
Declaration of conformity
- Object of the Declaration :Product:
- Product :E Battery Charger
- Model : G1554-1200W
We Guangdong ePropulsion Technology Limited, hereby, declares that this equipment is compliance with the applicable Directives and European Norms, and amendments.
The object of the declaration is in conformity with the following directives:
Electromagnetic Compatibility (EMC): 2014/30/EU
DirectiveLow Voltage Directive (LVD): 2014/35/EU
Applied Standards:
- EN 55032:2015+A1:2020
- EN IEC 61000-3-2:2019+A1:2021
- EN 61000-3-3:2013+A2:2021
- EN 55035:2017+A11:2020
- EN 62368-1:2014+A11:2017
EC REP
- Name : REP Europe GmbH
- Address : Werner-von-Siemens-Str. 264319 Pfungstadt Germany
- Phone : +49 157 51253212
- info@rep-europe.de
Manufacturer
- Name : Guangdong ePropulsion Technology Limited
- Address : Room 801, Building 1, 11 Daxue Road, Songshan Lake, Dongguan, Guangdong Province, China
- Signature:
- Date : 2023/10/18
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
Specifications
Specifications|
---|---
| |
Model| G1554-1200W|
Input voltage| 100 – 127 Vac| 200 – 240 Vac
Input current| ≤6.5A| ≤9A
Output voltage| 35.2 – 58.8 Vdc|
Output current| ≤15A| ≤25A
Rated output voltage| 48Vdc|
Power factor| ≥ 0.95|
Parallel connection| 8(Max)|
Conversion efficiency| ≥92%|
Protection level| IP65|
Operation temperature| -20 – +40℃|
Storage temperature| -40 – +85℃|
Certification| 1, CE-LVD 2,CE-EMC| 3,FCC 4,ROHS
Size
Mounting dimension
LED Indicator
In the Box
| Charger | 1 set | AC input cable | 1 set |
|---|
User manual
|
1 piece
|
E battery charger DC output
cable 2.5m (w aviation
|
1 piece
| | connector)|
Communication cable| 1 piece| |
Operation
- Ensure the power has been switched off, and complete the wiring according to the figure.
- Turn on the battery power button first, then turn on the AC switch.
- The green light of the charger flashes, indicating that the charger is charging normall
For the DC output cable, red is positive, black is negative.
Charge the battery by one charger:
Charge the battery by multiple chargers:
If charging in parallel, please buy official accessories and the recommended
number is shown in the table below.
| Item | Qty. |
|---|---|
| E battery charger Y type communication cable 0.5m | n-1 |
| E battery charger DC output cable 1m | n |
| E Battery Bus Bar 150A | 1 (n=2-3) |
| E Battery Bridging Cable (Positive & Negative) | 1 (n=2-3) |
* n is the number of the chargers which need to be connected in parallel
* If there are more complex parallel operating conditions, please contact ePropulsion
Technology’s authorized dealers.
Notes
- Do not puncture, throw, drop, bend or modify the charger.
- The charger should be used in well ventilated, dry, particle free environment.
- The charger should avoid direct sun exposure.
- Opening the housing of the charger without prior written consent of the manufacturer voids the manufacturer’s warranty immediately.
Warranty
ePropulsion E Battery Charger is guaranteed against any manufacturing defects for TWO years (uncommercial) from the date of purchase. Free warranty is only validated upon the presentation of Warranty Card, and evidence of purchase from an authorized ePropulsion dealer.
Conditions:
- Valid date of purchase should be established by the first-hand purchaser with original sales slip.
- Free warranty is not transferable and will not be reissued.
- The warranty is valid only when the information is correct and complete.
Warranty does not cover:
- Minor faults producing no influence on the intended function of the product.
- Faults resulting from any improper operation that contradicts the user manual.
- Accessories supplied with the product.
- Damage caused by accident, misuse, liquid damage or unauthorized repair.
- Damage caused by dropping, improper care or storage.
If warranty expires, users can still enjoy maintenance services from ePropulsion authorized dealers with minimum maintenance charge.
WARRANTY CARD ePropulsion E Battery Charger
(In order to validate warranty, please fill in this form first and read the
Warranty Policy.)
OWNER INFO.
- Owner Name
- Address
- Phone
DEALER INFO.
- Store Name
- Address
- Phone
PRODUCT INFO.
- Date of Purchase (mm/dd/yyyy)
- Serial No.
Guangdong ePropulsion Technology Limited
Email : service@epropulsion.com
Website : www.epropulsion.com
Dealer’s signature:
- Dealer info should be filled by the dealer when the product is purchased.
- Dealer’s signature indicates confirmation of above information
Please read this manual carefully before use. This manual is subject to update without prior notice, please visit our website www.epropulsion.com for the latest version.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>