ePropulsion SPIRIT 1.0 Plus-L Electric Outboard Motor Instruction Manual
- June 13, 2024
- EPROPULSION
Table of Contents
Instruction Manual
SPIRIT 1.0 Plus-L Electric Outboard Motor
Step 1: Hang the motor on the transom on the motor holder and tighten the two clamp handles.
Ensure to mount the outboard on the centerline of your boat. If the boat shape is asymmetric, please consult your dealer to get proper solution.
The mounting height of the outboard affects the running speed seriously.
When the mounting height is too high, ventilation may occur to waste power.
When the mounting height is too low, the water resistance will increase and it
will lead to efficiency and running speed reducing.
| Transom Height | Recommended Model |
|---|---|
| Higher than 500mm | SPIRIT 1.0 Plus-L |
| 400mm~500mm | SPIRIT 1.0 Plus-S |
| 300mm~400mm | SPIRIT 1.0 Plus-XS |
Select a proper model according to your transom height and applications. The
optimum mounting height is affected by the conditions of boat and
requirements. It’s recommended to test running at a different height to help
obtain the optimum mounting height. You can consult your dealer to get more
information.
Step2: Lift the battery by gripping the handle and pull up the battery lock.
Align the two slots on the battery bottom to the blocks on the bracket and put
down the battery. Release the battery lock and lock the battery on the
bracket.
Ensure to hold the battery handle before detaching or mounting the battery.
Step 3: Plug the power cable in the power port and tighten the connector.
The connector is metal, and it own needs to be figure tight ½ of a turn
clockwise.
Make sure the power cable connector and socket are dry before connecting to
avoid short-circuit.
Please spray and clean the connectors about every 3 months with contact spray.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>