MORIMOTO LED700 Boost Bar License Plate Light Installation Guide
- June 13, 2024
- MORIMOTO
Table of Contents
MORIMOTO LED700 Boost Bar License Plate Light
Product Information
- Product Name: Boost Bar License Plate Light
- Components Included:
- 1x Boost Bar License Plate Light
- 1x Input Pigtail
- 1x Double Wire T-Tap
- Needlenose Pliers (for wiretap)
- Manufacturer: Morimoto Lighting
Product Usage Instructions
- Ensure that the vehicle’s electrical system is turned off before starting the installation process.
- Locate the license plate area on your vehicle.
- Remove the existing license plate light fixture, if applicable, by unscrewing or unclipping it.
- Take the Boost Bar License Plate Light and connect the Input Pigtail to its designated connector.
- Identify the power source for the license plate light. This can be done by using a multimeter or consulting the vehicle’s wiring diagram.
- Using the Double Wire T-Tap and the provided Needlenose Pliers, tap into the power source wire by inserting it into the T-Tap and crimping it securely.
- Connect the other end of the Input Pigtail to the T-Tap, ensuring a secure connection.
- Test the installation by turning on the vehicle’s electrical system and checking if the Boost Bar License Plate Light illuminates properly.
- If the light does not function correctly, double-check all connections and consult a professional if necessary.
- Once the light is working as expected, secure the Boost Bar License Plate Light in place using the appropriate mounting method (screws, clips, etc.)
- Ensure that the light is properly aligned with the license plate area and adjust if necessary.
- Recheck all connections and ensure that no wires are exposed or pose a safety hazard.
- Turn on the vehicle’s electrical system and confirm that the Boost Bar License Plate Light continues to function properly.
WARNING: By reading this document, you agree it is only to be used as an educational guide. Morimoto Lighting nor its dealers make guarantees on any finished results, nor are theyto be held responsible for any damage, misuse, or personal injuries. If you are unable to clearly understand and adapt the information below, professional installation is recommended.
PACKAGE CONTENTS
- 1x Boost Bar License Plate Light
- 1x Input Pigtail
- 1x Double Wire T-Tap
TOOLS REQUIRED (NOT INCLUDED)
- Needlenose Pliers (for wiretap)
INSTALLATION PROCESS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>