MORIMOTO 2Banger LED Pods HXB Combo Beam Installation Guide
- June 9, 2024
- MORIMOTO
Table of Contents
MORIMOTO 2Banger LED Pods HXB Combo Beam Installation Guide
WARNING: By reading this document, you agree it is only to be used as an educational guide. Morimoto Lighting nor its dealers make guarantees on any finished results, nor are they to be held responsible for any damage, misuse, or personal injuries. If you are unable to clearly understand and adapt the information below, professional installation is recommended.
Instruction
-
The u-brackets are fitted under the molded pulp insert. Remove u-brackets prior to discarding insert!
-
Fit the carriage bolt through the u-bracket. When mounting, use the included washer and lock nut.
-
Remove the four (4) M4 screws using a Torx T20 bit driver. Fit bracket. Reinstall screws. Do not overtighten!
INFO@MORIMOTOLIGHTING.COM
MORIMOTOLIGHTING.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>