MORIMOTO BigBanger LED Pods HXB Spot Beam Installation Guide
- June 13, 2024
- MORIMOTO
Table of Contents
MORIMOTO BigBanger LED Pods HXB Spot Beam
WARNING:
By reading this document, you agree it is only to be used as an educational
guide. Morimoto Lighting nor its dealers make guarantees on any finished
results, nor are they to be held responsible for any damage, misuse, or
personal injuries. If you are unable to clearly understand and adapt the
information below, professional installation is recommended.
INSTALLATION INSTRUCTION
- The BigBanger is shipped with the u-brackets installed, but not tightened.
- To fit the carriage bolt through the u-bracket, remove the four (4) M6 screws using a T27 torx bit or driver.
- When reinstalling the M6 screws, do not use a power tool, and do not over tighten!
Contact Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>