LOREX W891UAD-E Wi-Fi 4K Dual Lens Smart Security Camera User Guide

LOREX W891UAD-E Wi-Fi 4K Dual Lens Smart Security Camera

Product Information

• Product Name: W891UA Series
• Manufacturer: lorex.com
• Weight: 0.68 kg (1.5 lbs)
• Device ID: LWZ83239593

Product Usage Instructions

1. Camera Mounting:

2. Place the provided Mounting Template onto the desired location. Ensure an outlet is nearby, and keep in mind the cable length.

3. Using a drill, drill through all 3 mounting screw holes on the template. Note: Drill a hole through the center of the template for your camera’s cable if you plan to run it through the mounting surface. If you are running the cable along a wall/ceiling, make sure to pass the cable through the cable notch.

4. Using a Phillips-head screwdriver and the provided Mounting Screws, secure the Mounting Bracket to the surface. Optional: If you are mounting your camera into drywall, use the provided anchors.

5. Connect your camera’s cable to the Power Adapter and plug into a nearby outlet.

6. (Optional) Use the provided Cable Clips and Screws to neatly secure your camera’s cable to the wall.

7. Adjust the angle of your camera.

8. Remove the vinyl film from the camera lens once your installation is complete.

9. FAQs:

10. How do I activate the smart motion detection features?
    1. Open the Lorex app and tap above the camera’s thumbnail.
    2. Tap Motion Detection Settings, and then to activate Motion Detection.
    3. Tap Smart Detection Settings, and then to activate the type of smart motion detection you want to use.

11. How do I customize Motion ZonesTM?
    1. Open the Lorex app and tap above the camera’s thumbnail.
    2. Tap Motion Detection Settings, and then to activate Motion Detection.
    3. Tap Motion ZonesTM, and then the type of smart motion detection you want to customize a motion detection area for.

12. How do I activate Deterrence Lights and/or Smart Security Lighting when smart motion is detected?
    1. Open the Lorex app and tap above the camera’s thumbnail.
    2. Tap Light Settings > Activate Light on Smart Motion.
    3. Tap on the type of smart motion detection you are using, and then to activate either Deterrence Light and/or Smart Security Lighting.

13. How do I turn Smart Security Lighting off?
    1. Open the Lorex app and tap above the camera’s thumbnail.
    2. Tap Light Settings > Smart Security Light Modes.
    3. Tap to deselect the mode, and then Set.

What’s Included

Note: Based on 1 camera

Tools Needed

• Drill
• Screwdriver

Smart Security LED Indicator

Press and hold the reset button until you hear the audio prompt.

Overview

1. Microphone
2. Dual Camera Lens.
3. Smart Security Lighting
4. IR Lights
5. Warning Lights
6. Camera Adjustment Screw
7. Mounting Bracket Adjustment Screw
8. Mounting Bracket
9. QR Code
10. Reset Button
11. MicroSD Card Slot
12. Speaker & Siren
13. Cable Notch

Camera Placement Tips

Important!

• Make sure the mounting surface is strong enough to hold at least 3x your camera’s weight.
• Take into consideration what you want to monitor and where is the best coverage area.
• Point the camera where there is the least amount of obstructions (i.e. tree branches).
• Install the camera in a location that is difficult for thieves and vandals to reach.
• Secure cabling so that it is not exposed or easily cut.

• Install the camera in a location that is central to the area you want to capture.
• The best position is 10 ft (3 m) above ground, angled 15° down.

Camera Mounting

1. Place the provided Mounting Template onto the desired location. Ensure an outlet is nearby, and keep in mind the cable length.

2. Using a drill, drill through all 3 mounting screw holes on the template.
   Note: Drill a hole through the center of the template for your camera’s cable if you plan to run it through the mounting surface. If you are running the cable along a wall/ceiling, make sure to pass the cable through the cable notch.

3. Using a Phillips-head screwdriver and the provided Mounting Screws, secure the Mounting Bracket to the surface. Optional: If you are mounting your camera into drywall, use the provided anchors.

4. Connect your camera’s cable to the Power Adapter and plug into a nearby outlet.

5. (Optional) Use the provided Cable Clips and Screws to neatly secure your camera’s cable to the wall.

6. Adjust the angle of your camera:

   • Loosen the Camera Adjustment Screw to rotate your camera downwards and sideways, then tighten to secure it in place.
   • Loosen the Mounting Bracket Adjustment Screw to rotate your camera and bracket clockwise or counter-clockwise around the base, then tighten to secure it in place.
   • Tip: For a sideways orientation of your camera you must rotate the mounting bracket by 90°, rotate the camera by 90°, and then point your camera to the desired side.

7. Remove the vinyl film from the camera lens once your installation is complete.

Camera Adjustment Screw

Mounting Bracket Adjustment Screw

App Setup

1. Download

2. Tap

Register Your Product

Please see our full Terms of Service and Limited Hardware Warranty Policy at: lorex.com/warranty

FAQs

• How do I activate the smart motion detection features?
  • Open the Lorex app and tap above the camera’s thumbnail.
  • Tap Motion Detection Settings, and then to activate Motion Detection.
  • Tap Smart Detection Settings, and then to activate the type of smart motion detection you want to use.
• How do I customize Motion Zones™?
  • Open the Lorex app and tap above the camera’s thumbnail.
  • Tap Motion Detection Settings, and then to activate Motion Detection.
  • Tap Motion Zones™, and then the type of smart motion detection you want to customize a motion detection area for.
• How do I activate Deterrence Lights and/or Smart Security Lighting when smart motion is detected?
  • Open the Lorex app and tap above the camera’s thumbnail.
  • Tap Light Settings > Activate Light on Smart Motion.
  • Tap on the type of smart motion detection you are using, and then to activate either Deterrence Light and/ or Smart Security Lighting.
• How do I turn Smart Security Lighting off?
  • Open the Lorex app and tap above the camera’s thumbnail.
  • Tap Light Settings > Smart Security Light Modes.
  • Tap to deselect the mode, and then Set.

Need Help?

For the additional support material, scan the below QR code or visit:

help.lorex.com/W891UASeries

Copyright © 2023 Lorex Technology Inc

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

References

• Security Cameras - Home Security Camera Systems | Lorex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>