CAZEBOO SANTA 400S300 Freestanding Louvered Pergola Instruction Manual
- June 9, 2024
- CAZEBOO
Table of Contents
SANTA 400S300 Freestanding Louvered Pergola
Product Information
The SANTA 400S300 is a temporary structure that can be used as a pergola. The package includes the following items:
- COM-000409 [x1]
- COM-000410 [x1]
- COM-000411 [x1]
- COM-000412 [x1]
- COM-000413 [x1]
- COM-000414 [x1]
- COM-000415 [x1]
- 7/8H X 2
- EN FR DE ES PT IT NL PL FI SE DK
Product Usage Instructions
Before starting the installation, please make sure to check building permits or other regulations in your jurisdiction that may require or regulate the installation and use of temporary structures. Once you are ready to begin, follow the instructions below:
Step 1: Prepare for Installation
- Ensure that you have the right tools for the installation.
- Allocate sufficient space and a clean, dry area to assemble your pergola.
Step 2: Assemble the Pergola
- Refer to the images and parts list in the manual to identify the parts required for each section of the pergola.
- Follow the assembly instructions and use the appropriate tools to connect each part together.
- Refer to the manual for guidance on how to connect each part of the pergola securely.
Step 3: Finish the Installation
- Once you have assembled the pergola, check again that all parts are securely connected.
- Place the pergola in the location where you want it to be used.
- Enjoy using your new pergola.
MAXIMUM WEIGHT
BEFORE STARTING THE INSTALLATION
- Please read all the instructions in this manual before starting to install your Pergola.
- Please check the contents of each box thanks to the parts list.
- Do not discard cartons until the product is fully assembled.
- Before purchasing or assembling this product, consult your local authorities regarding the installation of temporary structures.
Some jurisdictions may require building permits, or otherwise regulate installation and use. When you are ready to begin, make sure you have the right tools, plenty of space and a clean, dry place to assemble your pergola.
TOOLS REQUIRED
DIMENSION
PARTS
VIEW
TOP
MIDDLE
UNDER
INSTALLATION INSTRUCTION
Maintenance tips
Properties
For outdoor use only. The frame is made of aluminium parts, a material
renowned for its lightness, strength and resis-tance to the harshest weather
conditions. Moreover, it doesn’t rust. The blades are made of steel, a
material renowned for its durability and strength.
Assembly
The manufacture and assembly of this product requires that there is a gap
between the individual parts. As a result, gaps of up to several millimeters
are generally observed between the two components. This tolerance is necessary
for the correct realization of the product and can be the cause of geo-
metrical differences. This will not result in any loss of product
functionality.
Precautions for use
We cannot guarantee the durability of the product during difficult weather
conditions. It is suggested that you avoid being near or under the structure
during rainy and stormy weather. Once a major weather event has passed, we
recommend that you assess the overall condition of the structure before use.
The accumulation of snow, leaves or objects on the roof contributes to its
degradation and that of the structure: make sure to clean it regularly. We
advise against heat sources and lighting on or near the structure.
Maintenance
It is common for the product to show natural wear with time and use, resulting
in deterioration of the colours and surface finishes, mechanical functions and
tightening of the elements.
UV exposure
It’s normal for materials such as paints to become discoloured by UV light.
Each ray of sunlight or moonlight creates a new variation in the substance.
Colours normally wear out due to exposure to the outside world.
Tightening
Your product needs regular maintenance to remain functional. Doing these
repairs yourself on a regular basis can improve the longevity of the product.
Remember to tighten the components regularly.
Regular maintenance
It is important to maintain your product properly so that it does not
deteriorate. An aluminium structure has the advantage that you don’t have to
invest in products or equipment that are too specific.
All you need is:
- A soft sponge.
- A microfiber cloth.
- And a water jet.
Use a soft sponge with warm soapy water to remove any dust and dirt that has settled on the pergola. After cleaning, rinse with clean water (you can use a jet if it isn’t high-pressure). Don’t forget to rinse the feet as well so that no dirt remains. Finally, you can finish your work by wiping the structure with a microfibre cloth to dry it and restore its brilliance.
- Do not use abrasive products or detergents (bleach, acetone, etc.) that could damage the alumi-nium.
- Do not use a hard bristle brush, which could also damage the structure.
- Do not use a high-pressure jet.
Repeat the process for the steel blades.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>