BEMKO C37-PLD-285-180-4K Tokar LED Ceiling Lamp Instruction Manual
- June 5, 2024
- BEMKO
Table of Contents
C37-PLD-285-180-4K Tokar LED Ceiling Lamp
Instruction Manual
Installation instructions
| Detection distance: | Max 5m |
|---|---|
| Ambient Light: | <25Iux |
| Time Delay: | 5s ÷ 5min |
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with Your Local Authority or retailer for recycling advice.
1. Rated voltage, and frequency.
2. Power, luminous flux.
3. Color temperature, color rendering index.
4. Appliance classes.
5. ON/OFF cycles.
6. Lifetime.
7. International Protection Rating.
8. Protection against mechanical impacts.
9. Caution, risk of electric shock.| 10. It does not work with a dimmer.
11. For internal/external use.
12. Replace the defective lamp cover immediately.
13. Angle of illumination.
14. It does not work with cross and stairs connectors.
15. The minimum distance from the illuminated object.
16. Working temperature.
17. Maximum working time.
---|---
Security
Before mounting, read the instructions and disconnect the power supply.
Installation of the luminaire should be performed by a qualified user
authorized to mount electrical devices depending on the applicable regulations
in a given country, in accordance with the mounting diagram. Modifications to
the product may cause threats and loss of warranty.
Maintenance
All maintenance work should be carried out after disconnecting the power
supply. The product temperature may rise to an elevated value. Before
commencing maintenance, make sure that the product temperature is safe to make
it. Guarantee unrestricted air supply, do not cover the product. Use dry and
delicate materials for cleaning. The luminaires are not designed for
cooperation with dimmers and automation elements that may have an impact on
shortening the product’s service life. Do not use chemical agents. Product not
adapted to work in an environment with unfavorable conditions, i.e. high
dustiness/humidity, water, explosive zones, vibrations, chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire,
electric shock, burns, or other damage. Bemko sp. O.o. is not responsible for
failure to comply with the above recommendations. We also reserve the right to
make changes to the manual – the current version is available at
www.bemko.eu.
EU DECLARATION OF CONFORMITY
No: C524/2019
Manufacturer: Bemko Sp z o.o.
Address: ul. Bocznicowa 13
05-850 Jawczyce
hereby declare, that product:
LED Ceiling Lamp with microwave motion sensor
PSF706-124-MS, PSF706-164-MD, PSF706-224-MD
Is in compliance with the following directives/regulations:
2014/35/EU| of 26 February 2014 on the harmonization of the laws of the Member
States relating to the making available on the market of electrical equipment
designed for use within certain voltage limits is
---|---
2014/53/EU| of 16 April 2014 on the harmonization of the laws of the Member
States relating to the making available on the market of radio equipment and
repealing Directive 1999/5/EC
2011/65/EU| of 8 June 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
2009/125/EC| of 21 October 2009 establishing a framework for the setting of
ecodesign requirements for energy-related products
1194/2012| of 12 December 2012 implementing Directive 2009/125/EC of the
European Parliament and of the Council with regard to ecodesign requirements
for directional lamps, light-emitting diode lamps, and related equipment
245/2009| of 18 March 2009 implementing Directive 2005/32/EC of the European
Parliament and of the Council with regard to ecodesign requirements for
fluorescent lamps without integrated ballast, for high-intensity discharge
lamps, and for ballasts and luminaires able to operate such lamps, and
repealing Directive 2000/55/EC of the European Parliament and of the Council
874/2012| of 12 July 2012 supplementing Directive 2010/30/EU of the European
Parliament and of the Council with regard to energy labeling of electrical
lamps and luminaires
For evaluation below standards/technical documentation were used:
EN 60598-1:2015
Luminaires. General requirements and tests
EN 60598-2-1:1989
Luminaires. Particular requirements. Specification for fixed general purpose
luminaires
EN 62471:2008
Photobiological safety of lamps and lamp systems
EN 62493:2015
Assessment of lighting equipment related to human exposure to electromagnetic
fields
ETSI EN 300 440 V2.2.1:2018
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz
frequency range; Harmonised Standard for access to radio spectrum
ETSI EN 301 489-1 V2.1.1:2017
Technical requirements — Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/ 30/EU
EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances (IEC
63000:2016)
Warsaw 13.05.2019
ul. Bocznicowa 13
05-850 Jawczyce
www.bemko.eu
REGON: 140893162
NIP: 1181884396