BRESSER 7002510 Weather Station 5 in 1 Instructions
- September 26, 2024
- BRESSER
Table of Contents
BRESSER 7002510 Weather Station 5 in 1
Product Specifications:
- Product Name: Weerstation WTW 5in1
- Model Numbers: 7002510, 7002511, 7002512, 7902510, 7902511, 7902512, 7802580
- Components: Basisstation + Sensor
Product Usage Instructions:
1. Unboxing and Setup:
Follow the below steps to set up your Weerstation WTW 5in1:
- Identify the components in the package.
- If you have model numbers 7902510, 7902511, or 7902512, you will find the Basisstation (A) and the 5-in-1 sensor (B). For model number 7802580, you will only have the 5-in-1 sensor (B).
2. Mounting Instructions:
Mount the device as follows:
- Ensure the device is mounted at a height of 1.5 meters above the ground.
- Use the provided mounting pole, screws, and other accessories to securely install the device.
3. Powering On:
To power on the device:
- Insert the recommended batteries into the appropriate compartments.
- If applicable, press the RESET button to initialize the device.
4. Maintenance and Troubleshooting:
Follow these guidelines for maintenance and troubleshooting:
- Avoid disassembling the device. Contact your dealer in case of any issues.
- Avoid submerging the device in water to prevent damage.
Frequently Asked Questions (FAQ):
Q: What should I do if the device is not displaying accurate information?
A: Check the battery levels and connections. Ensure the device is correctly positioned for accurate readings.
Q: Can I use rechargeable batteries with this device?
A: It is recommended to use only the specified batteries to prevent malfunctions or damage to the device.
Q: How often should I calibrate the sensors?
A: Calibration frequency may vary based on usage and environmental conditions. It is advisable to refer to the user manual for calibration instructions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>