Kuryakyn 7568 ISO Wings Black Without Adapters Instruction Manual

June 13, 2024
KURYAKYN

Kuryakyn logo 7568 ISO Wings Black Without Adapters
Instruction Manual

7568 ISO Wings Black Without Adapters

Kuryakyn 7568 ISO Wings Black Without Adapters ISO WINGS—BLACK—WITHOUT ADAPTERS
7568

PARTS INCLUDED

2 Black ISO Wing Assemblies without Adapters
1 Installation Instructions
Please read and understand entire instructions before starting installation.

THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.

TOOLS SUGGESTED

Set of Hex Wrenches, Combination Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
NOTE: These pegs require the separate purchase of the appropriate Kurian footpeg adapter for your model.
STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface and turn off the ignition.
STEP 2 Remove the stock peg from the peg mount. Pay attention to any spacers or washers installed between the peg mount and the clevis, it may be helpful later. Keep the mounting hardware, it may be reused.
STEP 3 Install the new peg adapter as per the instructions with the peg adapter.
STEP 4 Check that the peg adapter is installed correctly and the adapter is able to fold upward.Kuryakyn 7568 ISO Wings Black Without Adapters - PIC
1 STEP 5 Position the peg as desired and tighten the 5/16”-18 socket head cap screw located on the end of the peg. To assist in holding the ISO Wing in the desired position, tighten the set screw on the side of the peg. PIC 1
STEP 6 Tighten all hardware securely.
ATTENTION! It is the installer’s responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Küryakyn will not warranty components lost due to improper installation.  Periodic maintenance may be required.

CUSTOMER SERVICE

877.370.3604 (toll free)

INSTALLATION QUESTIONS

techsupport@kuryakyn.com
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:

  • Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the  product(s).
  • The product must be properly installed, maintained and operated under normal conditions.
  • Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
  • Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any  breech of contract or duty between Küryakyn and a customer.
  • Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
  • Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’S contained in components of Küryakyn products will be warranted for defects in materials and workmanship for 3 years from the date of purchase where as all other components shall be warranted for one(1) year. This includes, but is not limited to; control modules, wiring, chrome & other components.
  • Küryakyn makes no warranty of any kind in regard to other manufacturer¹s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.

ABOUT OUR CATALOG

For purchasing Küryakyn® products, you can receive a complete catalog free of charge. Send the Proof-of-Purchase below with your address to: Küryakyn, P.O. Box 339, Somerset, WI 54025.
Please indicate either Accessories Catalog for Harley-Davidson® or GL & Metric Cruisers. Be sure to ask your local dealer about other Küryakyn® products, the motorcycle parts and accessories designed for riders by riders.
©2005  Küryakyn USA® All Rights reserved.

Kuryakyn logo

kuryakyn.com
7568-21MC-0711
Ride On!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

KURYAKYN User Manuals

Related Manuals