Kuryakyn 6319 ISO Motorcycle Handlebar Instruction Manual
- June 1, 2024
- KURYAKYN
Table of Contents
Kuryakyn 6319 ISO Motorcycle Handlebar
Product Information
Specifications:
- Product Name: Black ISO-Throttle Boss 6319
- Parts Included:
- 1 Black ISO Throttle Boss
- 4 4 14 x 9/16 Socket Head Cap Screws
- 1 Installation Instructions
Product Usage Instructions
CAUTION: Ensure that the installation of this product does not interfere with the proper operation of the motorcycle before riding.
Ride On!
FAQ
Q: How can I contact Customer Service for installation questions?
A: You can reach out to Customer Service at 877.370.3604 (toll-free) or
email techsupport@kuryakyn.com or call
715.247.2983.
Q: What is the warranty coverage for this product?
A: The warranty coverage is based on the date of purchase, and any claims
should be expedited by contacting Customer Service.
Responsibility ultimately lies with the manufacturer for warranty claim
disposition.
Q: Where can I find more products by Kuryakyn?
A: You can explore more products for H-D, GL, and Metric Cruisers in our
annual catalogs. Order a complimentary catalog for more details.
BLACK ISO-THROTTLE BOSS
PARTS INCLUDED
- 1 Black ISO-Throttle Boss
- 4 4-14 x 9/16″ Socket Head Cap Screws
- 1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KÜRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE
OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS
AND ATTENTION NOTES
REGARDING THE USE AND CARE OF THIS PRODUCT.
CAUTION! This indication alerts you to the fact that ignoring the contents described herein can result in potential injury or material damage.
ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.
TOOLS SUGGESTED
Set of Hex Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
PROCEDURE
STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface; turn off the ignition and allow the engine to cool.
STEP 2 Remove the 4 screws securing the end cap to the ISO-Grip. Remove the end cap and trim ring.
STEP 3 Place the ISO-Throttle Boss between the grip body and the trim ring (PIC 1). Loosely re-install the end cap with the Throttle-Boss in place using the included 4-40 x 9/16″ SHCS.
STEP 4 Position the ISO-Throttle Boss where it will be the most comfortable for you at cruising speeds.
STEP 5 Tighten the mounting screws.
ATTENTION! It is the installer’s responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Küryakyn will not issue a warranty on components lost due to improper installation. Periodic maintenance may be required.
CAUTION! Ensure that the installation of this product does not interfere with the proper operation of the motorcycle before riding.
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com or call
715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
- Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
- The product must be properly installed, maintained and operated under normal conditions.
- Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
- Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.
- Küryakyn products are often intended for use in specifc applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
- Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. Components of Küryakyn products containing L.E.D.s will be warranted for defects in materials and workmanship for 3 years from the date of purchase.
- Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer,but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and Metric Cruisers in our annual
catalogs. Order online today–select the ”CATALOGS” icon. Each Küryakyn®
product comes with a Proof-of-Purchase good for a complimentary catalog.
Details in packaging.
Be sure to ask your local dealer about other Küryakyn® products, the
motorcycle parts and accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>