Kuryakyn GL 1800 Foot Peg Adapters Instruction Manual
- June 13, 2024
- KURYAKYN
Table of Contents
Kuryakyn GL 1800 Foot Peg Adapters Instruction Manual
PARTS INCLUDED
1 Peg Adapter Set
1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING THE USE AND CARE OF THIS PRODUCT.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
ATTENTION! This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and functionality.
TOOLS SUGGESTED
Needle Nose Pliers
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY
AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.
STEP 2
Remove the stock pegs from the OEM mounts by removing the cotter pin and
washer from the bottom of the mounting pin. Watch how the placement of the
spring is connected to the peg and the hole in the mount. Keep all these
parts, they will be reused.
STEP 3
Reconnect the new peg adapter to the mount while making sure that the spring
is in the proper position. Drop mounting pin back into position and secure
with washer and cotter pin. Check to make sure that your peg adapter pivots up
freely.
STEP 4
Position the peg on the peg adapter and tighten the 5/16″-18 socket head cap
screw located on the end of the peg. The peg adapter will seat itself into the
peg and keep it from rotating.
STEP 5
Repeat above steps for other side.
WARNING! THE INSTALLATION OF AFTERMARKET PEGS MAY AFFECT GROUND CLEARANCE WHEN CORNERING.
ATTENTION! It is the installer’s responsibility to ensure that all of the
fasteners (including pre-assembled) are tightened before operation of the
motorcycle. Küryakyn will not issue a warranty on components lost due to
improper installation. Periodic maintenance may be required.
Ride On! 7939-21MC-1011
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of
defects in materials and workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the following provisions:
Küryakyn shall have no obligation in the event the customer is unable to
provide a receipt showing the date the customer purchased the product(s).
The product must be properly installed, maintained and operated under normal
conditions.
Küryakyn makes no warranty, expressed or implied, with respect to any gold
plated products.
Küryakyn shall not be liable for any consequential and incidental damages,
including labor and paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in nonconforming condition, or
for any breech of contract or duty between Küryakyn and a customer.
Küryakyn products are often intended for use in specific applications.
Küryakyn makes no warranty if a Küryakyn product is used in applications other
than intended.
Küryakyn electrical products are warranted for one (1) year from the date of
purchase by the consumer. L.E.D.’S contained in components of Küryakyn
products will be warranted for defects in materials and workmanship for 3
years from
the date of purchase where as all other components shall be warranted for
one(1) year.
This includes, but is not limited to; control modules, wiring, chrome & other
components.
Küryakyn makes no warranty of any kind in regard to other manufacturer¹s
products distributed by Küryakyn. Küryakyn will pass on all warranties made by
the manufacturer and where possible, will expedite the claim on behalf of the
customer, but ultimately, responsibility for disposition of the warranty claim
lies with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you can receive a complete catalog free of
charge.
Send the Proof-of-Purchase below with your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025. Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other Küryakyn® products, the
motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>