Kuryakyn 8883 Non Pivoting Splined Male Adapters Instruction Manual

: June 13, 2024
: KURYAKYN

Table of Contents

Kuryakyn 8883 Non Pivoting Splined Male Adapters
Product Information
Product Usage Instructions
PARTS INCLUDED
PROCEDURE
LIMITED WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kuryakyn 8883 Non Pivoting Splined Male Adapters

Product Information

The Non-Pivoting Splined Male Adapters (Part Number: 8883) are designed for HD male mount applications and are intended for use with Kuryakyn footboards (Part Numbers: 7916, 4455, 4351, or 4357). The package includes 2 adapters, 4 set screws (measuring 1/4 x 28 x 3/8), and installation instructions.

Product Usage Instructions

Before starting the installation, read and understand all steps in the instructions.
Park the motorcycle on a hard, level surface. Turn off the ignition and allow the engine to cool.
Remove the stock hardware securing the footpeg. Keep the hardware as it will be used later.
Insert a hex wrench through the splined end of the adapter as shown in PIC. 1.
Mount the set screw to the wrench and thread the included set screws into the adapter from the opposite end.
For now, thread the set screws into the adapter so they are not exposed and will not interfere with installation.
Test fit the adapter to the mount.
Install the hardware removed in Step 2 to secure the new adapter into the mount as shown in PIC. 2.
Tighten the set screws in the adapter (PIC. 3) to keep it level and prevent it from moving when a footboard is installed.

For any installation questions or further assistance, contact customer service at 877.370.3604 (toll-free) or email techsupport@kuryakyn.com. Please note that this product is covered by a limited warranty. The warranty claim process should be initiated with the date of purchase and the responsibility for disposition lies with the manufacturer.

FITS: HD MALE MOUNT APPLICATIONS. INTENDED FOR USE WITH KURYAKYN FOOTBOARDS
P/N 7916, 4455, 4351 OR 4357

PARTS INCLUDED

2 Non-Pivoting Splined Male Adapters
4 1/4 x 28 x 3/8″ Set Screws
1 Installation Instructions

Please read and understand entire instructions before starting installation.

THANK YOU FOR CHOOSING KÜRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING THE USE AND CARE OF THIS PRODUCT.

WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.

CAUTION! This indication alerts you to the fact that ignoring the contents described herein can result in potential injury or material damage.

ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.

TOOLS SUGGESTED

Set of Hex Wrenches

STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.

PROCEDURE

STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface; turn off the ignition and allow the engine to cool.

STEP 2 Remove the stock hardware securing the footpeg. Keep the hardware, it will be used later.

STEP 3 As shown in PIC 1, insert the hex wrench through the splined end of the adapter, mount the set screw to the wrench and thread the included set- screws in to the adapter from the opposite end.

STEP 4 For now, thread the set-screws into the adapter so they are not exposed and will not interfere with installation. Test fit the adapter to the mount.

STEP 5 As shown in PIC 2, install the hardware removed in Step 2 to secure the new adapter in to the mount.

STEP 6 Tighten the set-screws (PIC 3) in the adapter to keep it level and from moving when a footboard is installed.

ATTENTION! It is the installer’s responsibility to ensure that all of the fasteners (including preassembled) are tightened before operation of the motorcycle. Küryakyn will not warranty components lost due to improper installation. Periodic maintenance may be required.

CUSTOMER SERVICE 877.370.3604 (toll free)

INSTALLATION QUESTIONS techsupport@kuryakyn.com or call 715.247.2983

LIMITED WARRANTY

Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:

Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
The product must be properly installed, maintained and operated under normal conditions.
Küryakyn makes no warranty, expressed or implied, with respect to any gold-plated products.
Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.
Küryakyn products are often intended for use in speciﬁc applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. Components of Küryakyn products containing L.E.D.s will be warranted for defects in materials and workmanship for 3 years from the date of purchase.
Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer,
but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.

ABOUT OUR CATALOG

You’ll find all our innovations for H-D, GL and Metric Cruisers in our annual catalogs. Order online today–select the ”CATALOGS” icon. Each Küryakyn® product comes with a Proof-of-Purchase good for a complimentary catalog.
Details in packaging.

Be sure to ask your local dealer about other Küryakyn® products, the motorcycle parts and accessories designed for riders by riders.