BOULT Z40 Pro Bluetooth Truly Wireless in Ear Earbuds User Guide
- June 13, 2024
- BOULT
Table of Contents
BOULT Z40 Pro Bluetooth Truly Wireless in Ear Earbuds
Know your Z40 Pro
Whats In the Box
- Charging Case
- Earbuds
- Type c Charging
- Cable Manual
- Extra pair of ear tips
- Warranty Card
Product specification
- Product Name – TWS Bluetooth Headset
- Model – Boult Audio AirBass
- Bluetooth Range – ~10m/33ft (without any obstacles)
- Earbuds Charging Time – 60 mins
- Frequency Range – 20Hz – 20KHZ
- Technology – HFP/HSP/A2D/AVRCP
- Input – DC5V = 1A
How to use your Z40 Pro
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in the upper part of
the earbuds handle..
Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R
is worn on the right ear
Power ON/OFF
-
Power ON:
Auto: Open the charging case and take out the earbuds to Power ON.
Manually: Tap and hold the multifunction button (MFB) for 3 seconds. -
Power OFF
Auto: Place both the earbuds in the charging case, close the lid. Manually: Hold MFB for 5 seconds. -
Play/Pause
Tap the MFB once -
Next Track
Double Tap the right MFB -
Previous Track
Double Tap the left MFB -
Volume+
Triple Tap the right MFB -
Volume-
Triple Tap the left MFB -
Voice Assistant –
Long Press the MFB for 2s -
Answer the Call
Tap the MFB once -
End Call/Reject
Double Tap the MFB -
Game/Music Mode
Tap the Left MFB four times
Pairing
- Open the charging case, and toke out the earbuds, the earbuds LEDs will start flashing automatically until paired with a device.
- Activate Bluetooth on the device, turn on Bluetooth, search for the pairing name “Bault Audio Airboss” and click on it.
- Single Mode: When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
Bluetooth Lost
- Bluetooth Lost: Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can pair with other devices.
- If the connection range is exceeded, the earbuds will enter bock into connection mode. In case of no connection within 5 minutes, the earbuds will turn off.
Reset
If your earbuds foil to pair, or only one works, reset them .
- Delete all “Boult Audio Airboss” Bluetooth records on the phone and turn off Bluetooth.
- Put earbuds in the charging case and then toke out to pairing modes, top L&R buds 5 times simultaneously, and hear “DU” prompt voice to clear all pairing.
- Put earbuds bock into the charging case.
Voice Prompts
- You will hear ‘power on’ when the headset powers on.
- You will hear ‘power off’ when the headset powers off.
- You will hear ‘connected” when the headset is paired.
- You will hear ‘low battery’ when the headset is in low power status
- You will hear ‘gaming mode’ when the headset is in gaming mode.
Maintenance Instructions
Warranty is valid/invalid only basis of the below criteria:
- The product should be purchased through legal and formal channels to be applicable for warranty.
- Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>