1Mii B0303 Wireless Bluetooth Transmitter Receiver User Manual
- June 13, 2024
- 1Mii
Table of Contents
1Mii B0303 Wireless Bluetooth Transmitter Receiver
In The Box
Overview
Basic Operation
TX Mode
RX Mode
Bypass mode (Non-Bluetooth)
CE
ANKBIT international. hereby declares that this product is in compliance with
the essential requirements and otherrelevant provisions of Directive
2014/53/EU. In accordance with Article 10(2) and Article 10 (10), this product
is allowed to be used in all EU member states.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur duringshipping, repairs and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees. Qualcomm apt is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose the
used appliance together with household waste.
1Mii
- 60325 Frankfurt am Main,Germany contact@evatmaster.com
- Operator : Ankbit International Limited
- Address : 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
- Manufacturer : ShenZhen Ankbit Electronics Limited
- Address : Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan Dist., Shenzhen, China
FAQs
What is the 1Mii B0303 Wireless Bluetooth Transmitter Receiver?
The 1Mii B0303 is a wireless Bluetooth transmitter and receiver that allows you to stream audio between non-Bluetooth and Bluetooth devices.
Is the 1Mii B0303 compatible with my TV or audio source?
The 1Mii B0303 is compatible with most TVs, audio sources, and headphones with audio output options.
How does the 1Mii B0303 work as a transmitter?
As a transmitter, it connects to a non-Bluetooth audio source via audio cables and transmits the audio wirelessly to Bluetooth headphones or speakers.
Can the 1Mii B0303 pair with multiple Bluetooth devices?
Yes, it can pair with two Bluetooth devices simultaneously, allowing you to switch between them easily.
What is the range of the 1Mii B0303's Bluetooth signal?
The 1Mii B0303 has a Bluetooth range of up to 164 feet (50 meters) in an open space, but the range may vary depending on obstacles.
Does the 1Mii B0303 support low-latency audio transmission?
Yes, it supports low-latency aptX and aptX Low Latency codecs for minimal audio delay.
Can I use the 1Mii B0303 as a Bluetooth receiver for my non-Bluetooth speaker?
Yes, you can use it as a receiver to enable your non-Bluetooth speaker to play audio from Bluetooth-enabled devices.
Is the 1Mii B0303 powered by batteries or does it need to be plugged in?
The 1Mii B0303 is typically powered by a USB adapter or any USB power source, and it doesn't have an internal battery.
What audio output options are available on the 1Mii B0303?
The 1Mii B0303 has both 3.5mm audio and optical audio output options, providing versatility for various audio devices.
Is the 1Mii B0303 compatible with Bluetooth headphones and speakers of all brands?
It is compatible with most Bluetooth headphones and speakers, but the compatibility may vary based on specific devices and Bluetooth versions.
Does the 1Mii B0303 come with a warranty?
Yes, the 1Mii B0303 typically comes with a manufacturer's warranty to ensure its quality and performance.
Can I use the 1Mii B0303 for gaming with low-latency audio?
Yes, it is suitable for gaming with low-latency audio support, reducing audio delay for a better gaming experience.
Video-Introduction
Download This PDF Link: 1Mii B0303 Wireless Bluetooth Transmitter Receiver User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>