ARMEATOR A1 Wireless Bluetooth Meat Thermometer User Manual

ARMEATOR A1 Wireless Bluetooth Meat Thermometer

Quick Start Guide

1. When using it for the first time, please charge it for 15 minutes to ensure that the probe and DOCK are fully charged.
2. Download the ARMEATOR APP from the App Store or Google Play. Or scan the QR code to download.
3. Remove the probe and open the ARMEATOR APP. Follow the on-screen instructions to begin your cooking process.

ATTENTION

Insert the probe into the thickest part of the meat, and ensure the notch on the probe is fully covered by the meat while the tip of the probe is inside the meat.

Notes:
If you wrap your meat in aluminium foil. you must puncture the probe into the meat through the foil. If you wrap the probe and meat in foil, the probe will lose connectivity.

Description

1. Ceramic Handle
2. Ambient Temp. Sensor
3. Electrode
4. SUS304 Food Grade Stainless Steel
5. Internal Temp. Sensor
6. USB-C Charging Port
7. LCD Screen
8. Button
9. Magnet Backing

Operating Instruction

Power On
Remove the probe from the Dock, and the dock will activate automatically, accompanied by a brief series of beeps.

Temperature Information on Screen
When the screen lights up, pressing the button on the dock will reveal one of the following: Internal Temperature, Ambient Temperature, or Target Temperature. You can switch between them by clicking the button.

Internal Temperature

Ambient Temperature

• If the Ambient Temperature falls below 50°C/122°F, the screen will indicate this condition by displaying ‘LO’.
• If the Ambient Temperature exceeds 300°C/572°F, the screen will indicate this condition by displaying ‘HI’.

Target Temperature

If no target temperature has been set, the screen will show – – -.

Other Information on Screen

Connection Status

1. The Dock is not connected to your mobile device: the “ ” icon will blink.
2. The Dock is connected to your mobile device: the “ ” icon will remain consistently visible.
3. The Dock is not connected to the probe: the dock screen will display ‘- – -‘ and it will intermittently blink.
4. If the probe is damaged, the dock screen will display – – – without blinking.

Battery Level

1. Probe Battery: The battery icon next to “Internal Temperature” represents the Probe’s battery level.
2. Dock Battery: The battery icon next to “Ambient Temperature” represents the Dock’s battery level.

Target Temperature Reached
When the internal temperature reaches the target temperature, the background of the dock screen will turn red, and the dock will emit a continuous beeping sound until you press the button on the dock or tap the “Done” icon on your mobile device.

Probe & Dock Pairing

Auto Pairing:
When you place a new probe into the Dock, the dock will automatically recognize and pair with it, provided it is not the default probe.

Power Off

1. When you place the probe back into the Dock, the dock will automatically turn off.
2. If you turn on the dock by pressing the button while the probe is still in the dock, the dock will automatically turn off within 2 seconds.
3. Press and hold the button on the dock for 2 seconds, and the dock screen will display “OFF” before turning off.
   • If you do not place the probe back into the dock, the dock will not turn off automatically.

SPECIFICATIONS

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Information to user

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interfer-ence to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

• App Store is a service mark of Apple Inc.
• Google Play is a service mark of Google Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>