Roth Minishunt Plus With Wireless Regulation Installation Guide

Roth Minishunt Plus With Wireless Regulation

Roth Minishunt Plus

Product Information

• Product Name: Roth Minishunt Plus
• Installation Type: Room Thermostat
• Manufactu rer: ROTH
• Model Number : Not specified
• Website: roth-uk.com

Product Usage Instructions

1. Remove the screw and slide off the backplate of the thermostat.
2. Insert the included batteries, making sure to observe the +/- polarity.
3. Mount the backplate on the wall using screws (not included). The thermostat slides onto the backplate.
4. Pair/register the thermostat with the Controller. Connect all necessary components (pump, actuator) to the Controller before starting up. Refer to the Controller manual for detailed instructions. Press the registration button on the left side of the control unit and then press the registration button on the room thermostat. The current temperature will be displayed on the thermostat.
5. In sleep mode, the current temperature is displayed. To set or change the temperature, press the +/- button.
6. To view the battery level, select “Bat” on the screen. The screen will flash for 3 seconds, and the battery level will be displayed.
7. To lock the buttons, select “Loc” on the screen. The screen will flash for 3 seconds. You can choose to activate or deactivate the lock by selecting yes or no. After activating the lock, it will be activated after 10 seconds of inactivity. To unlock, press and hold the +/- buttons until “Ulc” appears on the screen.
8. To return from the menu manually, select “rEt” on the screen. The screen will flash for 3 seconds, and you will return to the view of the current temperature.

INSTALLATION

Roth wireless room thermostat

• Remove the screw and slide the backplate off.
• Insert batteries (included), be aware of +/- polarity.
• Mount the backplate on the wall (screws not incl.) thermostat slides onto the back plate.

Pairing/registering the thermostat. All connections must be made to the Controller (pump, actuator before start-up. Please see controller manual for details. Press the registration button on the left side of the control unit (see picture 5) and then press the registration button on the room thermostat (see picture 6). The temperature is now shown in the display.

Attention : Do not press the buttons on the front of the thermostat whilst pushing the pairing button on the rear (see picture 6).

Once the thermostat is connected to the Zone/Channel, the display shows the temperature on the thermostat
In the event of a power failure, the connection between the room thermostat and the receiver is restored within 5-10 minutes.

Operation of thermostat. In order to enter MENU, press and hold the + and – buttons. Use +/- to navigate between MENU settings.

Contact

For further assistance or technical support, please contact:

• ROTH UK Ltd
• ADDRESS: 1a Berkeley Business Park Wainwright Road Worcester WR4 9FA
• Phone: +44 (0) 1905 453424
• Email: enquiries@roth-uk.com

ROTH DANMARK A/S

• ADDRESS: Centervej 5 3600 Frederikssund
• Phone: +45 4738 0121
• Email: service@roth-danmark.dk

ROTH NORGE AS

• ADDRESS: Billingstadsletta 19 1396 Billingstad
• Phone : +47 67 57 54 00
• Email: service@roth-norge.no

ROTH FINLAND OY

• ADDRESS: Raaseporintie 9 (Talo 2) 10600 Tammisaari
• Phone: +358 (0)19 440 330
• Email: service@roth-finland.fi

ROTH SVERIGE AB

• ADDRESS: Höjdrodergatan 22 212 39 Malmö
• Tel. +46 40534090
• Fax +46 40534099
• E-mail: service@roth-sverige.se
• roth-sverige.se

References

• borger.dk - din indgang til det offentlige
• Frontpage | Norge.no
• Hej! Welcome to sweden.se – the official website of Sweden
• UK.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>