allen roth 81081 Kerner 1 Light 10.5 in Black Outdoor Wall Light with Clear Seedy Glass Instruction Manual
- May 15, 2024
- Allen+Roth
Table of Contents
81081 Kerner 1 Light 10.5 in Black Outdoor Wall Light with Clear
Seedy Glass
Instruction Manual
ITEM 10-IN OUTDOOR
WALL LANTERN
81081 Kerner 1 Light 10.5 in Black Outdoor Wall Light with Clear Seedy
Glass
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF,
LLC.
All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at 86 6-439-9800, 8 a.m. – 8 p.m.,
EST, Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com
PREPARATION
If any part is missing or damaged, do not attempt to assemble the product.
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
Estimated Assembly Time: 15-20 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
Model#81082
Made in China
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| The fixture does not light. | 1. The bulb is burned out. |
2. The power is off.
3. Faulty wire connection.
4. Faulty switch.| 1. Replace the bulb.
2. Make sure the power supply turns on.
3. Check wiring./Revise el cableado.
4. Test or replace the switch.
CARE AND MAINTENANCE
- Shut off main power supply before performing any maintenmance on the light.
- Wipe with damp cloth or use window cleaner. Do not use adrasives.
WARRANTY
The manufacturer warrants this product against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the product is found to be defective in material or workmanship, please contact the manufacturer. A copy of the original sales receipt will be required as proof of purchase. The manufacturer will, at its option, repair or replace the product. This warranty does not cover fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- Before beginning installation, turn off electricity at the circuit junction box or the main fuse box. .
- Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from electric shock.
CAUTION
- All electrical connections must be in agreement with local codes, ordinances or the national electric code(NEC). Contact your municipal building department to learn about your local codes, permits and/or inspections.
- Consult a qualified electrician before installation.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note:
Hardware shown actual size.
INSTALLATION OVERVIEW
Apply silicone caulking
compound around top and sides of canopy where back of canopy meets wall
surface to prevent water from 8 seeping into junction box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>