allen roth 81081 Kerner 1 Light Black Outdoor Wall Light Instruction Manual
- May 15, 2024
- Allen+Roth
Table of Contents
- allen roth 81081 Kerner 1 Light Black Outdoor Wall Light
- Product Specifications
- Package Contents
- Product Usage Instructions
- PACKAGE CONTENTS
- HARDWARE CONTENTS
- PREPARATION
- TOOLS REQUIRED (NOT INCLUDED)
- CARE AND MAINTENANCE
- INSTALLATION OVERVIEW
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
allen roth 81081 Kerner 1 Light Black Outdoor Wall Light
Product Specifications
- Brand : ALLEN + ROTH
- Model Numbers : #81081, #81082, #81084
- Type : 1 Light Exterior Wall Lantern
- Country of Origin : China
Package Contents
- A x 1 – Fixture Farol
- B x 1 – Mounting Plate (preassembled) Placa de montaje (preensamblada)
- C x 2 – Screw (preassembled) Tornillo (preensamblada)
- D x 1 – Ground Screw (preassembled) Tornillo de puesta a Tierra (preensamblada)
- E x 2 – Gasket (preassembled) Empaque (preensamblada)
Hardware Contents
- Wire Connector x 3 – Conector de alambres x 3
- Outlet Box Screw x 2 – Tornillo de la caja de salida x 2
- Ribbed Wire(Neutral Wire) – Conductor Estrada (conductor neutro)
- White Wire – Conductor blanco
- Smooth Wire(Hot Wire) – Conductor liso
- Ground Wire – Conductor de puesta a tierra Black Wire Conductor negro
Product Usage Instructions
Assembly
- Remove all components from the package.
- Attach the mounting plate to the wall using the provided screws.
- Connect the wires according to the instructions provided.
- Secure the fixture to the mounting plate.
Care and Maintenance
Please read and understand the entire manual before attempting to assemble, operate, or install the product. Regularly inspect the fixture for any damage or wear and tear. Clean the fixture with a damp cloth and avoid using harsh chemicals.
Installation
- Ensure the power source is turned off before starting the installation process.
- Follow the wiring diagram provided to connect the wires correctly.
- Mount the fixture securely to the wall using the provided hardware.
- Test the fixture to ensure it is functioning properly before completing the installation.
FAQ
Q: What should I do if the fixture does not light up?
Possible Causes:
- 1. Replace the bulb.
- 2. Check wiring.
- 3. Test or replace the switch.
Q: Where can I find more information about the product?
You can visit Lowes.com, search the item number, and refer to the Guides & Documents tab on the product’s page for additional information.
Thank you for purchasing this allen + roth product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
PACKAGE CONTENTS
HARDWARE CONTENTS
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with package contents list and hardware contents list If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10-15 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT?
- Visit lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Before beginning installation, turn off the electricity at the circuit junction box or the main fuse box.
- Before beginning installation, turn off electricity at the circuit junction box or the main fuse box./Antes de comenzar la instalación, desconecte el suministro eléctrico desde la caja de conexiones del circuito o la caja de fusibles principal.
- Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from electric shock.
CAUTION
- All electrical connections must be in agreement with local codes, ordinances or the National Electric Code (NEC). Contact your municipal building department to learn about your local codes, permits, and/or inspections
- Consult a qualified electrician before installation
TROUBLESHOOTING
CARE AND MAINTENANCE
- Shut off the main power supply before performing any maintenance on the light.
- Wipe with a damp cloth or use window cleaner. Do not use abrasive.
WARRANTY
- The manufacturer warrants this product against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the product is found to be defective in material or workmanship, please contact the manufacturer. A copy of the original sales receipt will be required as proof of purchase. The manufacturer will, at its option, repair or replace the product. This warranty does not cover fixtures becoming defective due to misuse, accidental damage, improper handling, and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state
INSTALLATION OVERVIEW
- Apply silicone caulking compound around top and sides of canopy where back of the canopy meets wall surface to prevent water from
- Leave the bottom unsealed so moisture can drain out. seeping into the junction box.
Questions, problems or missing parts?
- Before returning, contact us on:
- 866-439-9800, 8 a.m. – 8 p.m., EST, Monday – Sunday or
- ascs@lowes.com
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC.
All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>