Jula 021613 MEEC Multiserie Battery Instruction Manual

Jula 021613 MEEC Multiserie Battery

PRODUCT INFORMATION

The product mentioned in the user manual is a battery-operated device. It is manufactured by Jula AB and is intended for various applications. The device uses a 2 Ah Lithium-Ion battery, which can be charged using a 4 A charger. The charging time for the battery is approximately 30 minutes.

Product Description

The device is compact and portable, designed for easy handling and use. It features a battery status indicator that shows the level of charge in the connected battery. The device has a mounting mechanism for attaching the battery securely.

Product Usage Instructions

• Battery Charging:

  • Connect the battery to the device.
  • Use a 4 A charger to charge the battery.
  • The charging process will be indicated by the battery status indicator.
  • Wait for approximately 30 minutes for the battery to fully charge.
  • Once the battery is fully charged, the battery status indicator will show all four indicators lit.

• Battery Mounting:
  To mount the battery, follow these steps:

  • Locate the mounting mechanism on the device.
  • Align the battery with the mounting mechanism. vs. Insert the battery into the mounting mechanism until it clicks into place.
  • Ensure that the battery is securely attached before using the device 

• Battery Removal:
  To remove the battery, follow these steps:

  • Locate the release mechanism on the device.
  • Press and hold the release mechanism. vs. Simultaneously pull the battery out of the mounting mechanism.
  • Ensure that the battery is safely removed before storing or replacing it.

Safety Instructions

• Read and follow all safety instructions provided in the user manual.
• Only use the device for its intended purpose and according to the instructions.
• Do not modify or alter the device in any way.
• Dispose of the product according to local regulations and guidelines.

Technical Specifications

• Battery Capacity: 2 Ah
• Charging Time (with 4 A charger): 30 minutes
• Battery Technology: Lithium-Ion
  Note: For the latest version of operating instructions, refer to the Jula website.

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.

SAFETY INSTRUCTIONS

WARNING!
Read all warnings, safety instructions and other instructions carefully before use. Failure to follow all the instructions and safety instructions can result in the risk of electric shock, fire and/or serious personal injury. Save these instructions and safety instructions for future reference.

• Only charge the battery with the charger recommended by the manufacturer. Charging other batteries can result in a risk of personal injury and/or fire.
• Only use power tools with the batteries recommended by the manufacturer. The use of other batteries can result in a risk of personal injury and/or fire.
• When the battery is not in use keep it away from metal objects such as paperclips, coins, keys, nails, screws and other small metal objects that can short circuit the terminals. Short circuiting discharges large amounts of energy that can cause a fire and/or burn injuries.
• Failure to handle the battery carefully can cause fluid to leak from the battery. Avoid contact with battery fluid. On contact with battery fluid, rinse immediately with plenty of fresh water. Seek medical attention if you get battery fluid in your eyes. Battery fluid can cause skin irritation and/or burns
• Do not use damaged or modified batteries, or power tools that are damaged. Damaged or modified batteries can behave unexpectedly and cause a fire, explosion or risk of personal injury.
• Do not expose batteries or power tools to naked flames or heat. Batteries can explode when exposed to naked flames or temperatures higher than 130°C.
• Follow the instructions for charging and charge the battery only at the temperature indicated in the instructions. Incorrect charging or charging outside the given temperature range can damage the battery and cause a fire.
• Power tools must only be serviced by qualified personnel using identical spare parts. This will ensure that the power tool remains safe to use.
• Never attempt to repair damaged batteries. The battery must only be serviced by the manufacturer or at an authorised service centre.

SAFETY INSTRUCTIONS FOR LITHIUM BATTERIES

• Do not open the battery – risk of short circuiting.

• Do not expose batteries to moisture, direct sunlight or heat
  risk of explosion.

• If the battery is damaged or used incorrectly it can emit gas. Ventilate the area and seek medical attention if you experience discomfort. Gas can irritate the respiratory organs.

• Failure to handle the battery carefully can cause fluid to leak from the battery. Avoid contact with battery fluid. On contact with battery fluid, rinse immediately with plenty of fresh water. Seek medical attention on eye contact with battery fluid. Fluid leaking from the battery can cause irritation or burns.

• Only use original batteries from the manufacturer, with the voltage specified on the type plate on the power tool. The use of non original batteries or reconditioned batteries can result in a risk of explosion and personal injury.

• Check that the rated voltage of the battery corresponds to the rated voltage on the type plate on the charger. The charging of other batteries can cause a fire risk and/or explosion.

• The battery must only be charged with the charger recommended by the manufacturer. A charger intended for one type of battery can result in a fire risk if used with another type of battery.

• Handle the battery with care – do not expose it to knocks and blows, and protect it from contact with nails, screwdrivers and other sharp objects. Negligent handling and sharp objects can cause short circuiting in the battery, resulting in the emission of fumes, overheating, fire or explosion.

• Stop charging and/or using the battery immediately if it is damaged, deformed, abnormally hot, smells, or exhibits other unusual characteristics.

• Minor battery leakage can occur in extreme operating conditions or hot temperatures. If you get battery fluid on your skin or clothes, wash immediately with soap and water. Neutralise with lemon juice, vinegar or other weak acid.

• If you get battery fluid in your eyes, rinse your eyes with clean water for at least 15 minutes and then seek medical attention immediately
  WARNING!
  The product produces an electromagnetic field when in use. This field can in some circumstances affect active or passive medical implants. If you have a medical implant you should consult your doctor and/or the manufacturer of the medical implant before using the product to reduce the risk of serious or fatal personal injury.
  IMPORTANT:

  • Do not dismantle the battery or attempt to replace the battery cells.
  • Short circuiting the battery terminals on this battery by jewellery or tools can result in serious burn injuries.

SYMBOLS

TECHNICAL DATA

• Capacity 2 Ah
• Charging time (with 4 A charger) 30 min
• Battery technique Li-Ion

DESCRIPTION

Battery for tools in Meec Tools Multiseries 18 V, with battery indicator. Battery charger sold separately in Jula’s department stores and at www.jula.com.

1. Battery lock button (used to release battery)
2. Battery test button and charging indicator

INTENDED USE
The product must only be used as it is intended to be used and in accordance with these instructions.

USE

WARNING!

• Check that the power switch on the tool is in the OFF position before fitting/replacing battery.
• The product must only be charged with Meec Tools battery chargers. No other battery chargers must be used to charge this product – risk of fire and electric shock.

Charging status
Press the button beside the charge indicator to see the charging status of the battery. Four status lights show that the battery is fully charged, one status light shows that it is discharged.

Battery charging
NOTE:

• When the battery has been charged for the first time, make sure that it is fully discharged before charging it again. Repeat this charging and discharging cycle four or five times to condition the battery.
• The given times are only intended as guidance. The charging and discharging time is affected by the age, condition and use of the battery.

1. Place the battery charger on a level, stable surface. Plug the plug into an earthed power point with the correct mains voltage.
2. Connect the battery to the charger and check that it clicks in place.
3. The status lights for the battery charging status are described in the table below.
4. Pull out the plug from the power point and take the battery out of the charger.

Charging status
The following status lights are shown to indicate the battery status when the battery is put in the charger.

If the status lights on the charger do not go on:

• Check that the mains adapter for the charger is correctly plugged into the power point and that the charger is switched on.
• Check that the battery is correctly connected to the charger

INSERTING THE BATTERY
Connect the battery to the battery connection on the power tool and check that it clicks in place.

REMOVING THE BATTERY
Press the battery lock button and remove the battery from the power tool.

MAINTENANCE

WARNING!
Remove the battery from the power tool/charger before cleaning and/or maintenance, otherwise there is a risk of electric shock and/or personal injury.

CLEANING

• Wipe the battery with a dry or damp cloth. Do not use wet cloths. Do not use solvent, strong, or corrosive or abrasive detergents. This can damage the surface of the product.
• Clean the battery terminals and battery lock button after use. Do not use sharp or pointed things to clean the terminals.
• Dirt that has accumulated in places difficult to reach can be removed with compressed air of up to 3 bar.
• Check at regular intervals that all screw unions and other unions are correctly tightened. Tighten any loose unions immediately, otherwise there is a risk of serious personal injury.

STORAGE

• Fully charge the battery and disconnect it from the charger before putting it into storage.
• Do not store the battery where it can be exposed to direct sunlight or heat, for example near fireplaces or other sources of heat, as this will reduce the life span of the battery.
• If the battery cannot be stored in a warm place, it must be charged more often.
• Store out of the reach of children.
• Always remove the battery from the power tool before transport.
• Make sure the product is not exposed to heavy vibration or knocks during transport, especially when transported in a car or other vehicle.

IMPORTANT:

• Store the battery in a dry place at no more than 27°C.
• Store the battery with a 30 – 50% charge.
• Charge the battery every seven months during long-term storage.

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>