BOULT Y1 Pro TWS Earbuds User Manual
- June 13, 2024
- BOULT
Table of Contents
BOULT Y1 Pro TWS Earbuds
Product Information
- Product Name: Y1 Pro
- Features: Indicator Light, Textured Case, Multifunctional Indicator, Touch Control
- Included Accessories: Charging Case, Earbuds, Type C Charging Cable, Manual, Extra pair of ear tips, Warranty Card
Product Usage Instructions
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in the upper part
of the earbuds handle.
Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R
is worn on the right ear.
Power ON/OFF:
Power ON:
- Auto: Open the charging case and take out the earbuds to power ON.
- Manually: Tap and hold the multifunction button (MFB) for 3 seconds.
Power OFF:
- Auto: Place both the earbuds in the charging case and close the lid.
- Manually: Hold MFB for 5 seconds.
Playback Controls:
- Play/Pause: Tap the MFB once
- Next Track: Double Tap the right MFB
- Previous Track: Double Tap the left MFB
- Volume +: Triple Tap the right MFB
- Volume -: Triple Tap the left MFB
- Voice Assistant: Long Press the MFB for 2 seconds
- Answer the Call: Tap the MFB once
- End Call/Reject: Double Tap the MFB
- Game/Music Mode: Tap the MFB four times
Pairing Instructions:
- Open the charging case and take out the earbuds. The earbuds LEDs will start flashing automatically until paired with a device.
- Activate Bluetooth on your device and search for pairing name “Boult Audio Airbass”.
- Select “Boult Audio Airbass” to complete the pairing process.
Note: For Single Mode, when in dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
Bluetooth Lost:
If the connection range is exceeded, turn off your mobile phone’s Bluetooth.
The earbuds will enter pairing mode and can pair with other devices. If there
is no connection within 5 minutes, the earbuds will turn off.
Reset Instructions:
- If your earbuds fail to pair or only one works, reset them by deleting all Boult Audio Airbass Bluetooth records on your phone and turning off Bluetooth.
- Put earbuds in the charging case and then take them out to pairing modes.
- Simultaneously tap L&R 5 times to hear DU prompt voice and clear all pairings.
- Put earbuds back into the charging case.
Voice Prompts:
- You will hear “power on” when the headset powers on.
- You will hear “power off” when the headset powers off.
- You will hear “connected” when the headset is paired.
- You will hear “low battery” when the headset is in low power status.
- You will hear “gaming mode” when the headset is in gaming mode.
Maintenance Instructions:
Warranty is valid/invalid only based on the following criteria:
- The product should be purchased through legal and formal channels to be applicable for warranty.
- Damage caused intentionally/unintentionally or due to natural disasters, etc. is not covered by the warranty.
Touch Control
The touch control feature allows you to control various functions of the
earbuds by tapping and holding the multifunction button (MFB) located on each
earbud handle.
What’s In The Box?
- Charging Case
- Earbuds
- Type C Charging
- Cable Manual
- Extra pair of ear tips
- Warranty Card
Product specification
- Product Name – TWS Bluetooth Headset
- Model – Boult Audio AirBass
- Bluetooth Range – ~10m/33ft (without any obstacles)
- Earbuds Charging Time – 60 mins
- Frequency Range – 20Hz – 20KHz
- Technology – HFP/HSP/A2Dp/AVRCP
- Input – DC5V = 1A
How to use your Y1 Pro ?
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in the upper part of
the earbuds handle.
Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R
is worn on the right ear.
Power ON/OFF
Power ON:
Auto: Open the charging case and take out the earbuds to Power ON.
Manually: Tap and hold the multifunction button (MFB) for 3 seconds.
Power OFF
Auto: Place both the earbuds in the charging case, close the lid.
Manually: Hold MFB for 5 seconds.
Play/Pause
Tap the MFB once
Next Track
Double Tap the right MFB
Previous Track
Double Tap the left MFB
Volume +
Triple Tap the right MFB
Volume –
Triple Tap the left MFB
Voice Assistant
Long Press the MFB for 2s
Answer the Call
Tap the MFB once
End Call/Reject Double
Tap the MFB
Game/Music Mode
Tap the MFB four times
Pairing
Open the charging case, and take out the earbuds, the earbuds LEDs will start
flashing automatically until paired with a device. Activate Bluetooth on the
device, turn on Bluetooth, search for pairing name “Boult Audio Airbass” and
click on it.
Single Mode: When on dual mode, put one earbud into the charging case. Only
take one earbud out of the charging case and connect it.
Bluetooth Lost:
Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can
pair with other devices.
If the connection range is exceeded, the earbuds will enter the back
connection mode. No connection within 5 minutes, the earbuds will turn off.
Reset
- If your earbuds fail to pair, or only one works, reset them. Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off Bluetooth.
- Put earbuds in the charging case and then take out to pairing modes, tap L&R 5 times simultaneously, hear “DU” prompt voice to clear all pairing.
- Put earbuds back into the charging case.
Voice Prompts
- You will hear ‘power on’ when the headset powers on.
- You will hear ‘power off’ when the headset powers off.
- You will hear ‘connected’ when the headset is paired.
- You will hear ‘low battery’ when the headset is in low power status
- You will hear ‘gaming mode’ when the headset is in gaming mode.
Maintenance Instructions
- Warranty is valid/invalid only basis of the below criteria:
- The product should be purchased through legal and formal channels to be applicable for warranty.
- Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty. ˜
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>