BOULT W20 Zen ENC Mic 32H Battery Life User Manual
- June 13, 2024
- BOULT
Table of Contents
800-289-0096 Technical Support:
888-886-6189 © 2003 Bosch Security Systems Subject to change Printed in the USA 33829E https://manual-hub.com/." width="177" height="23" />
BOULT W20 Zen ENC Mic 32H Battery Life
OVERVIEW
Know your W20
What’s in the box
- Charging Case
- Earbuds
- Type C Charging Cable
- Extra pair of ear tips
- Warranty Card
Product specification
- Product Name – TWS Bluetooth Headset
- Model – Boult Audio AirBass
- Bluetooth Range – -10m/33ft (without any obstacles)
- Earbuds Charging Time – 45 mins
- Frequency Range – 20Hz – 20KH2
- Technology – HFP/HSP/A2Dp/AVRCP
- Input – DC5V = 1A
How to use your W20 ?
-
Touch Controls
- The Touch Area (Multi-Functional Touch Panel is located in the upper part of the earbuds handle.
-
Wearing Earbuds
- The earbud marked with L is worn on the left ear and the earbud marked with R is worn on the right ear
-
Power ON/OFF:
- Power ON: Auto: Open the charging case and take out the earbuds to Power ON. Manually: Tap and hold the multifunc- tion button (MB) for 3 seconds.
- Power OFF: Auto: Place both the earbuds in the charging case, close the lid
-
Play/Pause
Tap the MFB once -
Next Track
Double Tap the right MFB -
Volume +
Triple Tap the right MFB -
Answer the Call
Tap the MFB once -
Previous Track
Double Tap the left MFB -
Voice Assistant
Long Press the MFB for 2s -
Volume –
Triple Tap the left MFB -
End Call/Reject
Double Tap the MB -
Game/Music Mode
Tap the MB four times
Pairing
Open the charging case, and take out the earbuds, the earbuds LEDs will start
flashing automatically until paired
with a device
Activate Bluetooth on the device, turn on Bluetooth, search for pairing name
“Boult Audio Airbass” and click on it.
- Single Mode: When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
- Bluetooth Lost: Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can pair with other devices.
- If the connection range is exceeded, the earbuds will enter back into connection mode. In case of no connection within I 5minutes, the earbuds will turn off. Reset
- If your earbuds fail to pair, or only one works, reset them.
- Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off Bluetooth.
- Put earbuds in the charging case and then take out to pairing modes, tap L& 5 times simultaneously, hear “DU” prompt voice to clear all pairing. Put earbuds back into the charging case.
Voice Prompts
- You will hear ‘power on” when the headset powers on.
- You will hear ‘power off when the headset powers off.
- You will hear ‘connected’ when the headset is paired.
- You will hear ‘low battery* when the headset is in low power status
- You will hear gaming mode when headset is in Gaming mode
Maintenance Instructions
- Warranty is valid/invalid only basis of the below criteria:
- The product should be purchased through legal and formal channels to be applicable for warranty.
- Damaging the product intentionally /unintentionally, or due to natural disasters, etc. is not covered in the warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>