aLora WV352206 Martine 2 Light 6 Wall Vanity Installation Guide
- June 13, 2024
- aLora
Table of Contents
aLora WV352206 Martine 2 Light 6 Wall Vanity
Product Information
- Product Name: WV352206 Wall Lamp
- Manufacturer: Alora Lighting
- Technical Support: 1.855.855.8926
- Email: technicalsupport@aloralighting.com
- Website: www.aloralighting.com
TECHNICAL SUPPORT 1.855.855.8926
technicalsupport@aloralighting.com
Safety Instruction
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
lease Note:
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
Assembly Instruction
- Step 1 Remove fixture from its original package.
- Step 2 Separate mounting plate (1c) from fixture (2a) by removing fixture screws (2b).
- Step 3 Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package.
- Step 4 Secure mounting plate (1c) to mounting surface with anchors (1f) and screws (1g)
- Step 5 Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package.
- Step 6 Attach fixture (2a) to mounting plate (1c) with fixture screws (2b).
- Step 7 Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket.
You are now ready to enjoy your fixture.
- P: 1.855.855.8926
- CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
- USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081 www.aloralighting.com 20230619
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>