Linocell 24266 LED Bluetooth Speaker User Manual

June 3, 2024
Linocell

Linocell 24266 LED Bluetooth Speaker

Linocell-24266-LED-Bluetooth-Speaker-PRODOCT

Overview

Linocell-24266-LED-Bluetooth-Speaker-FIG1

  1. Power on/off/TWS
  2. LED light on/off/effect
  3. Microphone
  4. Volume -/previous track
  5. Play/pause/source
  6. Volume +/next track
  7. USB-C charging port
  8. 3.5 mm AUX port
  9. LED indicator
  10. USB-A port (flash storage)
  11. Micro SD card slot

Specifications

Linocell-24266-LED-Bluetooth-Speaker-FIG2 Linocell-24266-LED-Bluetooth-Speaker-FIG3

Included:
Bluetooth speaker, USB-C charging cable (50 cm), 3.5 mm audio cable (50 cm), manual.

Use

Charging
Connect the included USB-C cable between the USB-C charging port (7), a USB charger and a wall socket. The LED indicator (9) lights up red and turns off when the speaker is fully charged. Charge the speaker fully before first use. The speaker emits a sound to indicate battery power is low and needs to be recharged.
Power on/off
Press and hold the Povwer on/off button (1) to turn on the speaker. Press and hold the power button again to turn the speaker off.
Bluetooth pairing
Turn on the speaker, the LED indicator (9) lights up blue and starts flashing. The speaker automatically enters Bluetooth pairing mode. Open the Bluetooth settings on your smart device and connect to “Linocell BIS11. A sound is emitted from the speaker to confirm that the connection was successful. The speaker automatically connects to the last paired smart device the next time it is powered on. Double press the Source button (5) to disconnect the current device connected via Bluetooth. The LED indicator (9) starts flashing blue and the speaker automatically enters pairing mode again.

USB flash/SD card source
Connect a USB flash memory to the USB-A port (10) or a Micro SD card to the Micro SD card slot (11). If no audio is playing the speaker automatically changes to the most recently connected source. Control the music by using the speaker controls. (See “Control music and calls)
Note! Only MP3 files stored on a USB flash memory or Micro SD card can be played by the speaker.
AUX in
Connect the included 3.5 mm audio cable to the 3.5 mm AUX input (8) and your audio source. Press and hold the Source (5) multiple times to select AUX in mode.
Note! Transport controls (play/pause, next/previous track) are disabled in AUX in mode. Use your smart device to control the music.

Control music and calls

  • Play or pause music/answer or end calls: press the Play/pause/source button (5).
  • Reject an incoming call: double press the Play/pause/source button (5).
  • Volume down: press the Volume – button (4).
  • Previous track: press and hold the Previous track button (4).
  • Volume up: press the Volume + button (6).
  • Next track: press and hold the Next track button (6).
  • Change between USB flash memory. SD card, 3.5 mm AUX and Bluetooth source: press and hold the Source button (5).

True wireless mode (TWs)
The TWS function allows two LED Bluetooth speakers to be paired together and play the same audio source in stereo playback.
Note! The speakers cannot be separated more than 3 meters for the TWS function to work. TWS only works with the same model of speaker sold by Kjell & Co. The TWS mode is only available when using Bluetooth as the audio source.

  1. Make sure the speakers are not paired with any external Bluetooth devices/sources.
  2. Turn on the two Bluetooth speakers at the same time.
  3. Double press the TWS button (1) on one of the speakers to initiate TWS pairing.
  4. The speakers connect automatically and a sound is emitted from the second speaker when the TWS pairing is made.
  5. Open the Bluetooth settings on your smart device and connect to “Linocell BTS11”. A sound is emitted from one of the speakers to confirm when the Bluetooth connection is successful.

Safety information

The speaker contains a rechargeable Li-ion battery and the battery cannot be replaced. Do not open or disassemble the product.
Simplified EU Declaration of Conformity
Kjell &Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/24266.

www.linocell.com
BOx 50435 Malmö
Sweden
2022-09-07

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals