aLora WV332815 Two Light Vanity Cairo User Guide
- June 13, 2024
- aLora
Table of Contents
aLora WV332815 Two Light Vanity Cairo
Product Information
| Model Number | WV332815 |
|---|---|
| Product Name | Wall Lamp |
| Manufacturer | Alora Lighting |
| Manufacturer Contact | P: 1.855.855.8926 |
Canada: 19054 28th Avenue Surrey – BC V3Z 6M3
USA: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
Website: www.aloralighting.com
Product Usage Instructions
- Step 1: Remove the fixture from its original package.
- Step 2: Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
- Step 3: Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Step 4: Make proper electrical connections by connecting the black wire to the hot L, the white wire to the neutral N, and the ground wire to GND. Use the wire nuts (1b) provided in the hardware package.
- Step 5: Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
- Step 6: Install the recommended lamp (4a) (not provided) to the fixture socket. Refer to the socket label for the maximum wattage and type of lamp to use.
You are now ready to enjoy your wall lamp.
Technical Support
If you need any technical assistance, please contact our support team:
Phone: 1.855.855.8926
Email:
technicalsupport@aloralighting.com
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
-
Step 1
Remove fixture from its original package. -
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b). -
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package. -
Step 4
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package. -
Step 5
Attach canopy (2a) to mounting plate (1c) with canopy screws (2b). -
Step 6
Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket.
You are now ready to enjoy your fixture.
P: 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com
20230619
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>