aLora CH338632UBCC Lucian Round Chandelier User Guide
- June 13, 2024
- aLora
Table of Contents
aLora CH338632UBCC Lucian Round Chandelier
Product Information
- Product Name: CH338632 Chandelier
- Manufacturer: Alora Lighting
- Technical Support Contact: 1.855.855.8926
- Email: [email protected]
- Website: www.aloralighting.com
- Model Number: CH338632
Product Usage Instructions
- Warning: These instructions are provided for your safety. We highly recommend that a licensed, trained electrician install this unit.
- Ensure that you have all the necessary components included in the package.
- Step 1: Remove the chandelier from its original package.
- Step 2: Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
- Step 3: Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Step 4: Determine the hanging height of the fixture by securing the rods (2d) to the canopy (2a) and fixture hub (5a), after feeding the fixture’s wires through the rods.
- Step 5: Make proper electrical connections by connecting the black wire to hot L, white wire to neutral N, and ground wire to GND. Use the wire nuts (1b) provided in the hardware package.
- Step 6: Attach the fixture shade (3b) to the fixture (3a) and secure it with the socket nut (3c) using the socket nut wrench (4b). Install the recommended lamp (4a) (not provided) to the fixture socket, following the maximum wattage and type specified on the socket label.
- Step 7: Hook the fixture suspension rods (5b) to the fixture hub (5a) and fixture (3a). Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
- You are now ready to enjoy your chandelier.
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
-
Step 1
Remove the fixture from its original package. -
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b). -
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in the hardware package. -
Step 4
Determine the hanging height of the fixture by securing rods (2d) to canopy (2a) and fixture hub (5a), after feeding fixture wires through rods. -
Step 5
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in the hardware package -
Step 6
Attach fixture shade (3b) to fixture (3a) and secure with socket nut (3c) using socket nut wrench (4b). Install the recommended lamp (4a) (not provided) (referred to on the socket label for maximum wattage and type) to the fixture socket. -
Step 7
- Hook fixture suspension rods (5b) to fixture hub (5a) and fixture (3a). Attach canopy (2a) to mounting plate (1c) with canopy screws (2b).
- You are now ready to enjoy your fixture.
TECHNICAL SUPPORT
- [email protected].
- P: 1.855.855.8926
- CANADA: 19054 28th Avenue Surrey – BC V3Z 6M3
- USA: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
- www.aloralighting.com.