aLora CH355632 Wynwood 6 Light Chandelier User Guide
- June 13, 2024
- aLora
Table of Contents
aLora CH355632 Wynwood 6 Light Chandelier
Product Information
- Product Name: Chandelier
- Model Number: CH355632
- Manufacturer: Alora Lighting
- Technical Support Contact: 1.855.855.8926
- Email: [email protected].
- Website: www.aloralighting.com
Address:
- Canada: 19054 28th Avenue Surrey – BC V3Z 6M3
- USA: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
Product Usage Instructions
- Remove the chandelier from its original package.
- Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
- Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Determine the hanging height of the fixture by securing the rods (2d) to the canopy (2a) and fixture top (3a) after feeding the fixture wires through the rods.
- Make proper electrical connections using the quick connector (5c) provided. Secure the fixture plate (5b) to the fixture hub (5d) with screws (5a) (refer to Illustration 1).
- Make proper electrical connections (black to hot L, white to neutral N, ground to GND) with the wire nuts (1b) provided in the hardware package.
- Install the recommended lamp (4a) (not provided) according to the socket label for maximum wattage and type. Secure the shade (3c) to the fixture head (3b) by threading clockwise.
- Attach the canopy (2a) to the mounting plate (1c) with the canopy screws (2b). You are now ready to enjoy your chandelier.
PRECAUTION
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame.
- The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
-
Step 1
Remove fixture from its original package. -
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b). -
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package. -
Step 4
Determine hanging height of fixture by securing rods (2d) to canopy (2a) and fixture top (3a) after feeding fixture wires through rods. -
Step 5
Make proper electrical connections using quick connector (5c) provided. Secure fixture plate (5b) to fixture hub (5d) with screws (5a) (See Illustration 1). -
Step 6
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package. -
Step 7
Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket. Secure shade (3c) to fixture head (3b) by threading clockwise. -
Step 8
Attach canopy (2a) to mounting plate (1c) with canopy screws (2b). You are now ready to enjoy your fixture.
CONTACT
- P: 1.855.855.8926
- CANADA: 19054 28th Avenue Surrey – BC V3Z 6M3
- USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
- www.aloralighting.com.
- 20230619
TECHNICAL SUPPORT
- 1.855.855.8926
- [email protected].