aLora SF344012 Palmetto 1 Light Semi Flush Mount User Guide
- June 13, 2024
- aLora
Table of Contents
aLora SF344012 Palmetto 1 Light Semi Flush Mount
Product Information
- Product Model: SF344012
- Product Type: Semi-Flush
Warnings and Cautions
Before using the product, please read and understand the following warnings and cautions:
- This product should be installed and operated by a qualified electrician.
- Ensure that the electrical junction box is properly installed and meets local electrical codes.
- Do not exceed the recommended maximum wattage and type of lamp specified on the socket label.
- Make sure to securely attach the glass to the fixture by threading it clockwise.
Product Assembly Instructions
- Remove the fixture from its original package.
- Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
- Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Make proper electrical connections by using wire nuts (1b) provided in the hardware package. Connect black wire to hot L, white wire to neutral N, and ground wire to GND.
- Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
- Install the recommended lamp (4a) (not provided) according to the maximum wattage and type specified on the socket label.
- Securely attach the glass (3b) to the fixture (3a) by threading it clockwise.
You are now ready to enjoy your fixture.
Technical Support
Contact our technical support for any further assistance:
- Phone: 1.855.855.8926
- Email: technicalsupport@aloralighting.com.
Address:
- Canada: 19054 28th Avenue Surrey – BC V3Z 6M3
- USA: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
- Website: www.aloralighting.com.
- Date: 20230619
PRECAUTION
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must besecurely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align
- the fixture.
ASSEMBLY INSTRUCTIONS
-
Step 1
Remove fixture from its original package. -
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy screwsB (2b). -
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package. -
Step 4
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package. -
Step 5
Attach canopy (2a) to mounting plate (1c) with canopy screws (2b). -
Step 6
Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket. -
Step 7
Secure glass (3b) to fixture (3a) by threading clockwise. You are now ready to enjoy your fixture
CONTACT
- P: 1.855.855.8926
- CANADA: 19054 28th Avenue Surrey – BC V3Z 6M3
- USA: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
- www.aloralighting.com.
- 20230619
TECHNICAL SUPPORT
- 1.855.855.8926
- technicalsupport@aloralighting.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>