alora PD331016 Light Pendant Instruction Manual

alora PD331016 Light Pendant

Product Information

Email: technicalsupport@aloralighting.com
Address (Canada)| 19054 28th Avenue Surrey – BC V3Z 6M3
Address (USA)| 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
Website| www.aloralighting.com

Product Usage Instructions

1. Remove the pendant fixture from its original package.
2. Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
3. Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
4. Determine the hanging height of the fixture by securing the rods (2d) to the canopy (2a) and fixture (3a), after feeding the fixture’s wires through the rods.
5. Make proper electrical connections by using wire nuts (1b) provided in the hardware package. Connect the black wire to hot L, the white wire to neutral N, and the ground wire to GND.
6. Attach the socket assembly (3b) to the fixture (3a), followed by the metal washer (5a), rubber washer (5b), glass (5c), bottom rubber washer (5d), nut (5e), and secure with the finial (5f) by threading clockwise. Install the recommended lamp (4a) (not provided) as indicated on the socket label for maximum wattage and type.
7. Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).

You are now ready to enjoy your pendant fixture.

TECHNICAL SUPPORT

• 1.855.855.8926
• technicalsupport@aloralighting.com

WARNINGS AND CAUTIONS

• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all times during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference

Please Note: 120V input

NOTICE

• The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
• This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.

ASSEMBLY INSTRUCTIONS

1. Step 1
   Remove fixture from its original package.

2. Step 2
   Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b).

3. Step 3
   Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package.

4. Step 4
   Determine hanging height of fixture by securing rods (2d) to canopy (2a) and fixture (3a), after feeding fixtures wires through rods.

5. Step 5
   Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package

6. Step 6
   Attach socket assembly (3b) to fixture (3a), followed by metal washer (5a), rubber washer (5b), glass (5c), bottom rubber washer (5d), nut (5e) and secure with finial (5f) by threading clockwise. Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket.

7. Step 7
   Attach canopy (2a) to mounting plate (1c) with canopy screws (2b). You are now ready to enjoy your fixture.

P: 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081 www.aloralighting.com 20230619

References

• Alora Lighting | A Shining light in style, quality and customer care.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>