alora CH332421 Cairo Chandelier Installation Guide

alora CH332421 Cairo Chandelier

Product Information

• Product Name: Chandelier
• Model Number: CH332421

Warnings and Cautions

1. Please read and follow all instructions before installing or using the chandelier.
2. 2. Ensure that the electrical junction box is properly installed and capable of supporting the weight of the chandelier.
3. 3. Make sure to use the recommended lamp and follow the maximum wattage and type specified on the socket label.
4. 4. Ensure that proper electrical connections are made with wire nuts provided in the hardware package.
5. 5. Contact technical support for any assistance or queries.

Assembly Instructions:

1. Step 1: Remove the chandelier from its original package.
2. Step 2: Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
3. Step 3: Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
4. Step 4: Determine the hanging height of the fixture by securing rods (2d) to the fixture (3a) and hooking them onto the canopy (2a), after feeding the fixture’s wires through the rods.
5. Step 5: Make proper electrical connections by connecting the black wire to hot L, white wire to neutral N, and ground wire to GND using wire nuts (1b) provided in the hardware package.
6. Step 6: Install the recommended lamp (4a) (not provided) to the fixture socket, following the maximum wattage and type specified on the socket label.
7. Step 7 : Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).

You are now ready to enjoy your chandelier!

Technical Support:

For any technical support or assistance, please contact:

• Phone: 1.855.855.8926
• Email: technicalsupport@aloralighting.com
• Website: www.aloralighting.com
• Address (Canada): 19054 28th Avenue Surrey – BC V3Z 6M3
• Address (USA): 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
• Product reference : 20230619

TECHNICAL SUPPORT

• 1.855.855.8926
• technicalsupport@aloralighting.com

WARNINGS AND CAUTIONS

• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all times during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference

Please Note: 120V input

NOTICE

• The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
• This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.

ASSEMBLLY INSTRUCTIONS

1. Step 1
   Remove fixture from its original package.

2. Step 2
   Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b).

3. Step 3
   Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package.

4. Step 4
   Determine hanging height of fixture by securing rods (2d) to fixture (3a), and hooking onto canopy (2a), after feeding fixtures wires through rods.

5. Step 5
   Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package

6. Step 6
   Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket.

7. Step 7
   Attach canopy (2a) to mounting plate (1c) with canopy screws (2b). You are now ready to enjoy your fixture.

P: 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA : 3035 E. Lone Mountain Rd – Las
Vegas, NV, 89081 www.aloralighting.com
20230619

References

• Alora Lighting | A Shining light in style, quality and customer care.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>